Hello all, Anyone can tell me the cause of the problem that I am experiencing with the GTalk channel? Please advice. I need to make this channel work.
Thank you in advance. GNUbie On Fri, Jan 30, 2009 at 10:29 PM, GNUbie <[email protected]> wrote: > Hello Grygoriy, > > Below is the contents of my rtp.conf file on my Asterisk box: > > # cat /etc/asterisk/rtp.conf > [general] > rtpstart=10000 > rtpend=10100 > > Below is my INPUT chain of my IPTables rules on my Asterisk box: > > # iptables -L -v | grep 100 > 21 3304 ACCEPT udp -- eth0 any anywhere > anywhere state NEW udp dpts:10000:10100 > > Below is the output on my Asterisk shell when trying to call via GTalk: > > - - - < s n i p > - - - > > pbx*CLI> > JABBER: gtalk INCOMING: <iq to="[email protected]/asteriskE2D976CC" > type="set" id="38" from="[email protected]/Talk.v1048785AD0F"><session > type="initiate" id="4015721897" > initiator="[email protected]/Talk.v1048785AD0F" > xmlns="http://www.google.com/session";><description xml:lang="en" > xmlns="http://www.google.com/session/phone";><payload-type id="103" > name="ISAC" clockrate="16000"/><payload-type id="97" name="IPCMWB" > clockrate="16000" bitrate="80000"/><payload-type id="99" name="speex" > clockrate="16000" bitrate="22000"/><payload-type id="4" name="G723" > clockrate="8000" bitrate="6300"/><payload-type id="98" name="speex" > clockrate="8000" bitrate="11000"/><payload-type id="100" name="EG711U" > clockrate="8000" bitrate="64000"/><payload-type id="101" name="EG711A" > clockrate="8000" bitrate="64000"/><payload-type id="0" name="PCMU" > clockrate="8000" bitrate="64000"/><payload-type id="8" name="PCMA" > clockrate="8000" bitrate="64000"/><payload-type id="13" name="CN" > clockrate="8000"/><payload-type id="102" name="iLBC" clockrate=" > > JABBER: gtalk INCOMING: 8000" bitrate="13300"/><payload-type id="106" > name="telephone-event" clockrate="8000"/></description><transport > xmlns="http://www.google.com/transport/p2p"/></session></iq> > [Jan 30 16:13:39] ERROR[1303]: rtp.c:1945 ast_rtp_new_with_bindaddr: > Unexpected bind error: Cannot assign requested address > [Jan 30 16:13:39] WARNING[1303]: chan_gtalk.c:971 gtalk_alloc: Out of > RTP sessions? > [Jan 30 16:13:39] WARNING[1303]: chan_gtalk.c:1175 gtalk_newcall: > Unable to allocate gtalk structure! > pbx*CLI> > JABBER: gtalk INCOMING: <iq to="[email protected]/asteriskE2D976CC" > type="set" id="40" from="[email protected]/Talk.v1048785AD0F"><session > type="transport-info" id="4015721897" > initiator="[email protected]/Talk.v1048785AD0F" > xmlns="http://www.google.com/session";><transport > xmlns="http://www.google.com/transport/p2p";><candidate name="rtp" > address="10.10.1.142" port="1488" preference="1" > username="Mpw2GdwhB4BLuzFd" protocol="udp" generation="0" > password="c1bKKRVq6RtlGyzT" type="local" > network="0"/></transport></session></iq> > > JABBER: gtalk INCOMING: <iq to="[email protected]/asteriskE2D976CC" > type="set" id="41" from="[email protected]/Talk.v1048785AD0F"><session > type="transport-info" id="4015721897" > initiator="[email protected]/Talk.v1048785AD0F" > xmlns="http://www.google.com/session";><transport > xmlns="http://www.google.com/transport/p2p";><candidate name="rtp" > address="219.74.65.168" port="1489" preference="0.9" > username="3vKhUDU34prYnmSJ" protocol="udp" generation="0" > password="iJr15yqQhRJ7Gw9o" type="stun" > network="0"/></transport></session></iq> > pbx*CLI> > JABBER: gtalk INCOMING: <iq to="[email protected]/asteriskE2D976CC" > type="set" id="43" from="[email protected]/Talk.v1048785AD0F"><session > type="terminate" id="4015721897" > initiator="[email protected]/Talk.v1048785AD0F" > xmlns="http://www.google.com/session"/></iq> > [Jan 30 16:13:54] NOTICE[1303]: chan_gtalk.c:783 gtalk_hangup_farend: > Whoa, didn't find call! > > JABBER: gtalk OUTGOING: <iq type='result' > from='[email protected]/asteriskE2D976CC' > to='[email protected]/Talk.v1048785AD0F' id='43'/> > > JABBER: gtalk INCOMING: <presence > from="[email protected]/Talk.v1048785AD0F" type="unavailable" > to="[email protected]"/> > -- JABBER: I am unavailable ^_* 14 > -- JABBER: type: 14 subtype 0 > pbx*CLI> > > - - - < s n i p > - - - > > Attached is a screenshot of my port forwarding configuration on my > firewall/router. > > Regards, > > GNUbie > > > On Thu, Jan 29, 2009 at 11:12 PM, Grygoriy Dobrovolskyy > <[email protected]> wrote: >> And what ports have you set in rtp.conf ? i suppose they are the same ? >> Try to search if there are no spercial jabber ports to open. >> >> 2009/1/29 GNUbie <[email protected]> >>> >>> Hello Grygoriy, >>> >>> I am forwarding UDP ports from 10000 to 10100. That only means that I >>> am forwarding 101 ports. Please take note also that when I tried >>> calling the GTalk ID, the Asterisk box was idle or there was no any >>> other on-going calls. >>> >>> Regards, >>> >>> GNUbie >>> >>> On Thu, Jan 29, 2009 at 4:15 PM, Grygoriy Dobrovolskyy >>> <[email protected]> wrote: >>> > How many ports have you forwarded for the * ? (in rtp.conf) >>> > If a limited amount (50-100), try to forward more. >>> > >>> > 2009/1/29 GNUbie <[email protected]> >>> >> >>> >> Hello all, >>> >> >>> >> In addition to my previous e-mail, below is a more verbosed messages I >>> >> got on my Asterisk shell when calling from another GTalk User ID to >>> >> the Asterisk-1.4.21.2 box: >>> >> >>> >> pbx*CLI> >>> >> JABBER: gtalk INCOMING: <iq to="[email protected]/asteriskE2D976CC" >>> >> type="set" id="49" from="[email protected]/Talk.v1041B79926B"><session >>> >> type="initiate" id="3756468934" >>> >> initiator="[email protected]/Talk.v1041B79926B" >>> >> xmlns="http://www.google.com/session";><description xml:lang="en" >>> >> xmlns="http://www.google.com/session/phone";><payload-type id="103" >>> >> name="ISAC" clockrate="16000"/><payload-type id="97" name="IPCMWB" >>> >> clockrate="16000" bitrate="80000"/><payload-type id="99" name="speex" >>> >> clockrate="16000" bitrate="22000"/><payload-type id="4" name="G723" >>> >> clockrate="8000" bitrate="6300"/><payload-type id="98" name="speex" >>> >> clockrate="8000" bitrate="11000"/><payload-type id="100" name="EG711U" >>> >> clockrate="8000" bitrate="64000"/><payload-type id="101" name="EG711A" >>> >> clockrate="8000" bitrate="64000"/><payload-type id="0" name="PCMU" >>> >> clockrate="8000" bitrate="64000"/><payload-type id="8" name="PCMA" >>> >> clockrate="8000" bitrate="64000"/><payload-type id="13" name="CN" >>> >> clockrate="8000"/><payload-type id="102" name="iLBC" clockrate=" >>> >> >>> >> JABBER: gtalk INCOMING: 8000" bitrate="13300"/><payload-type id="106" >>> >> name="telephone-event" clockrate="8000"/></description><transport >>> >> xmlns="http://www.google.com/transport/p2p"/></session></iq> >>> >> [Jan 29 11:18:24] ERROR[1303]: rtp.c:1945 ast_rtp_new_with_bindaddr: >>> >> Unexpected bind error: Cannot assign requested address >>> >> [Jan 29 11:18:24] WARNING[1303]: chan_gtalk.c:971 gtalk_alloc: Out of >>> >> RTP sessions? >>> >> [Jan 29 11:18:24] WARNING[1303]: chan_gtalk.c:1175 gtalk_newcall: >>> >> Unable to allocate gtalk structure! >>> >> pbx*CLI> >>> >> JABBER: gtalk INCOMING: <iq to="[email protected]/asteriskE2D976CC" >>> >> type="set" id="51" from="[email protected]/Talk.v1041B79926B"><session >>> >> type="transport-info" id="3756468934" >>> >> initiator="[email protected]/Talk.v1041B79926B" >>> >> xmlns="http://www.google.com/session";><transport >>> >> xmlns="http://www.google.com/transport/p2p";><candidate name="rtp" >>> >> address="10.20.1.151" port="1587" preference="1" >>> >> username="RrBBqm7MeJW2zTgi" protocol="udp" generation="0" >>> >> password="OjLNI9dyFLqqBi/Y" type="local" >>> >> network="0"/></transport></session></iq> >>> >> pbx*CLI> >>> >> JABBER: gtalk INCOMING: <iq to="[email protected]/asteriskE2D976CC" >>> >> type="set" id="52" from="[email protected]/Talk.v1041B79926B"><session >>> >> type="transport-info" id="3756468934" >>> >> initiator="[email protected]/Talk.v1041B79926B" >>> >> xmlns="http://www.google.com/session";><transport >>> >> xmlns="http://www.google.com/transport/p2p";><candidate name="rtp" >>> >> address="219.74.65.168" port="1588" preference="0.9" >>> >> username="sHhE4y2GwRBmLQUB" protocol="udp" generation="0" >>> >> password="BYAvdVRiU94RVOJW" type="stun" >>> >> network="0"/></transport></session></iq> >>> >> pbx*CLI> >>> >> JABBER: gtalk INCOMING: <iq to="[email protected]/asteriskE2D976CC" >>> >> type="set" id="54" from="[email protected]/Talk.v1041B79926B"><session >>> >> type="terminate" id="3756468934" >>> >> initiator="[email protected]/Talk.v1041B79926B" >>> >> xmlns="http://www.google.com/session"/></iq> >>> >> [Jan 29 11:18:40] NOTICE[1303]: chan_gtalk.c:783 gtalk_hangup_farend: >>> >> Whoa, didn't find call! >>> >> >>> >> JABBER: gtalk OUTGOING: <iq type='result' >>> >> from='[email protected]/asteriskE2D976CC' >>> >> to='[email protected]/Talk.v1041B79926B' id='54'/> >>> >> >>> >> JABBER: gtalk INCOMING: >>> >> pbx*CLI> >>> >> JABBER: gtalk INCOMING: <presence >>> >> from="[email protected]/Talk.v1041B79926B" >>> >> to="[email protected]"><priority>24</priority><c >>> >> node="http://www.google.com/xmpp/client/caps"; ver="1.0.0.104" >>> >> ext="share-v1 voice-v1" xmlns="http://jabber.org/protocol/caps"/><x >>> >> stamp="20090129T03:17:52" xmlns="jabber:x:delay"/><status/><x >>> >> >>> >> >>> >> xmlns="vcard-temp:x:update"><photo>8939f8f8ed0a9cd794e9e3c7065c2cc80fa9dbf0</photo></x></presence> >>> >> pbx*CLI> >>> >> JABBER: gtalk INCOMING: <presence >>> >> from="[email protected]/Talk.v1041B79926B" type="unavailable" >>> >> to="[email protected]"/> >>> >> pbx*CLI> >>> >> >>> >> Thank you in advance. >>> >> >>> >> Regards, >>> >> >>> >> Marvin >>> >> >>> >> >>> >> On Thu, Jan 29, 2009 at 10:47 AM, GNUbie <[email protected]> wrote: >>> >> > Hello all, >>> >> > >>> >> > It used to work on calling my GTalk ID from another GTalk user. But >>> >> > now that I tried calling it again, the caller hears only a ringtone >>> >> > and disconnected after a few rings. The messages on my >>> >> > Asterisk-1.4.21.2 are the following: >>> >> > >>> >> > [Jan 29 10:37:51] ERROR[1303]: rtp.c:1945 ast_rtp_new_with_bindaddr: >>> >> > Unexpected bind error: Cannot assign requested address >>> >> > [Jan 29 10:37:51] WARNING[1303]: chan_gtalk.c:971 gtalk_alloc: Out of >>> >> > RTP sessions? >>> >> > [Jan 29 10:37:51] WARNING[1303]: chan_gtalk.c:1175 gtalk_newcall: >>> >> > Unable to allocate gtalk structure! >>> >> > [Jan 29 10:38:06] NOTICE[1303]: chan_gtalk.c:783 gtalk_hangup_farend: >>> >> > Whoa, didn't find call! >>> >> > >>> >> > Any idea? >>> >> > >>> >> > Thank you in advance. >>> >> > >>> >> > Regards, >>> >> > >>> >> > GNUbie >>> >> > >>> >> >>> >> _______________________________________________ >>> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >> >>> >> asterisk-users mailing list >>> >> To UNSUBSCRIBE or update options visit: >>> >> http://lists.digium.com/mailman/listinfo/asterisk-users >>> > >>> > >>> > _______________________________________________ >>> > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> > >>> > asterisk-users mailing list >>> > To UNSUBSCRIBE or update options visit: >>> > http://lists.digium.com/mailman/listinfo/asterisk-users >>> > >>> >>> _______________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
