2009/2/4 Mark Michelson <mmichel...@digium.com> > Olivier wrote: > > Hi, > > > > voip-info.org <http://voip-info.org> is almost silent regarding > > udptl.conf except with > > "Depending on your fax device (such as the Linksys 3102) you may have > > to edit the udptl.conf file. The error correction type that is sent is > > usually the culprit of many problems with ATAs and T.38 providers." > > > > Can anyone elaborate on this ? > > > > Regards > > > If you look at configs/udptl.conf.sample, all the options are outlined > there, > although the explanations are very brief. The most likely setting that is > referred to on voipinfo is the T38FaxUdpEC setting. Possible values are > t38UDPFEC and t38UDPRedundancy, with the former being the default. Looking > at > the code, it appears that the options are case-sensitive for udptl.conf, > which > is quite a bit different from the rest of Asterisk, so be sure to get the > case > correct. > > Mark Michelson >
Something is worrying me a bit about this : if T38FaxUdpEC value in udptl.conf is device-dependent, then how can you set different values when using different devices : device A needs t38UDPFEC device B needs t38UDPRedundancy then which value in udptl.conf ? (when asking this, I'm implying Asterisk is a B2BUA and receives/transmit each T.38 call leg. I'm understanding this correctly ?) > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users