I'm using an FXS, but it is pretty much the same. What part do you need? It is virtually the same as using a Cisco PRI card. Here is the relevant part on the Cisco. On * you just set it up like a gateway.
dial-peer voice 200 voip destination-pattern .T progress_ind setup enable 3 session protocol sipv2 session target ipv4:192.168.1.10 (IP of * box) session transport udp dtmf-relay rtp-nte codec g711ulaw fax rate disable fax nsf 000000 no vad ! dial-peer voice 1 pots description DID 1234567890 destination-pattern 1234567890 port 2/0 voice-port 2/0 caller-id enable Phibee Network Operation Center wrote: > Anyone use CIsco 1760 with Asterisk ???? > > > > Phibee Network Operation Center a écrit : >> Hi >> >> i am search a sample config (for asterisk and for cisco) for connect >> a cisco 1760 with a FXO card to my asterisk. >> >> Thanks for your help >> Jerome >> >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
