Then all you need is a cheap way to integrate SIP, h323, and all the other advanced features that * brings to the table....
-----Original Message-----
From: James H. Thompson [mailto:[EMAIL PROTECTED]
Sent: Wed 1/7/2004 9:30 PM
To: [EMAIL PROTECTED]
Cc:
Subject: Re: [Asterisk-Users] RE: Inexpensive Analog Ports
> 2 sipuras SPA2000, sold at 100USD each they have 2 FXS ports its like
> cisco ata
While this is certainly a step in the right direction, it needs to get cheaper
to compete with
existing solutions.
For example if you were to configure a 6x24 (6 FXO ports, 24 FXS ports)
Panasonic PBX with voice
mail, it comes out to approx $48 per port including everything except the
phones. The FXS ports
support both ordinary analog phones and Panasonic system phones.
Reference: http://www.twacomm.com/Catalog/Model_KX-TA624-5.htm
Panasonic KX-TA624 PBX
KX-TA624 System Unit $420 with 3 FXO and 8 FXS ports
KX-TA62477-3 3x8 expansion $300 with 3 FXO and 8 FXS ports
KX-TA62470-2 0x8 expansion $230 with 8 FXS ports
KX-TVS50 2 port Voicemail $500
Total $1,450 with 6 FXO ports 24 FXS ports
Total Ports 30 *
Cost per port $48
* voice mail interconnect may use two of the ports
Jim
[EMAIL PROTECTED]
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
<<winmail.dat>>
