Did you use the same screen name / name for the 2 SIP extensions you setup
on the one phone?  If so, some phones will confuse asterisk based on the SIP
header (in particular AASTRA phones).  If this is an Aastra phone, this is
probably the cause...

 

From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Olivier
Sent: February 17, 2009 8:47 AM
To: Asterisk Users List
Subject: Re: [asterisk-users] Pingable and Unreachable at the same time !

 

 

2009/2/17 Marc STORCK <msto...@voipgate.com>

Asterisk doesn't use PING to check the STATUS, it uses a SIP OPTION message.


Yes.
I think that simply, in this case, the endpoint (SIP phone) is just broken :
it wouldn't reply to anything ...

I'm not 100% sure now, but wouldn't be surprised ...

 

Regards,

 

Marc

 

From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Olivier
Sent: mardi 17 février 2009 14:06
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Pingable and Unreachable at the same time !

 

Hi,

Has anyone met something like this ?

dialor*CLI> sip show peers
Name/username              Host            Dyn Nat ACL Port     Status
7541/7541                  (Unspecified)    D          0        UNKNOWN
7540/7540                  (Unspecified)    D          0        UNKNOWN
7534/7534                  (Unspecified)    D          0        UNKNOWN
7533/7533                  (Unspecified)    D          0        UNKNOWN
7531/7531                  192.168.100.199  D          5060     OK (10 ms)
7530/7530                  192.168.100.196  D          5060     UNREACHABLE
patton/patton              192.168.100.52   D          5060     OK (33 ms)
trunk/trunk4ipbx           192.168.64.2                5060     OK (1 ms)
8 sip peers [Monitored: 3 online, 5 offline Unmonitored: 0 online, 0
offline]
dialor*CLI> !ping 192.168.100.196
PING 192.168.100.196 (192.168.100.196) 56(84) bytes of data.
64 bytes from 192.168.100.196: icmp_seq=1 ttl=64 time=0.334 ms
64 bytes from 192.168.100.196: icmp_seq=2 ttl=64 time=0.305 ms
64 bytes from 192.168.100.196: icmp_seq=3 ttl=64 time=0.305 ms

Any explaination ?

Regards


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

 

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to