Hello all, I have two machines I'm connecting with TDMOE (dahdi dynamic spans) and I have a question about timing parameters. By my understanding one machine should be the source of the timing and the other a slave of that timing.
So on machine A I have the following in system.conf: dynamic=eth,eth0/00:0C:29:55:89:7E,24,0 On machine B I have this is system.conf: dynamic=eth,eth0/00:18:8B:C7:F6:94,24,1 So machine A is the source of timing and B is slave to it. If both of these machines also have a digium (TDM400P in one and a TE110P in the other) card in them is this configuration still correct or should I use 0 for timing on both? The reason I ask is if I boot both machines fresh and I execute dahdi_cfg on machine A first and then machine B I either get a kernel oops (with 2.6.27.11) or complete freeze (with 2.6.23.17) on machine B pretty much without fail. If I do machine B first and then A everything works fine. I'm using dahdi_linux 2.1.0.4 on both. I know I can just use SIP or IAX or anything else to connect these two machines, but I'm using this as a learning experience to play with PRI setups. Thanks -Dave _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
