Jay Ray schrieb: > Setup is: > Asterisk --->NAT--> SIP Proxy > > I have following entry for SIP Proxy in sip.conf > > [Proxy] > > type=peer > host=Static IP (NAT Firewalls public IP) > username=xxxx > secret=xxxxx > nat=yes > canreinvite=no > qualify=yes > > Proxy sends a call and I get this error > > Found no matching peer or user for <NAT's Public IP:70001 > > NAT is using 70001 as the source port in the INVITE message and it > keeps changing per call. > > Can I set a wildcard for the port in Asterisk so it accepts calls from > SIP PRoxy behind NAT even though it is using source port of 70001??? > tried port=* for the peer...NO LUCK.... > > ANy ideas would be welcome.. > > Thx, > Ujjval. > > > I think that your Nat Router do something very strange here. Nat could only be from Port 0 to 65534 so it could not work with this port, cause its impossible not because its especially the port 70001.
best regards steve smith -- Für weitere Fragen stehen wir gerne unter [email protected] oder 059944 - 2440 zur Verfügung. Mit freundlichen Grüssen -- Stefan Schmidt Sysadmin/VOIP // [email protected] // Tel 059944-2440// ------------------------------------------------- SILVER SERVER GmbH // Lorenz-Mandl-Gasse 33/1 // A-1160 Wien // Fax 059944-9000 // www.sil.at // ------------------------------------------------- _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
