Hi I have been having a rough time getting a Sangoma A200/Remora FXO/ FXS Analog AFT card set up properly.
The main issue is that the card has four ports and as far as I can tell Asterisk is only seeing two. On the two that it recognizes the "Green" FXS ports are not green, they just are not lit. The "RED" FXO ports are indeed red, but from what I have read your not supposed to plug the analog phone into those. So from my standpoint its not "working" below is some more info about my system. Any help would be appreciated. I am running the following: http://wiki.sangoma.com/sangoma-hardware#A200 Asterisk 1.6.0.5 dahdi-linux-2.1.0.4 dahdi-tools-2.1.0.2 wanpipe-3.3.15.20 linux kernel 2.6.27 The card is detected, but I can only get two channels configured. Here is my chan_dahdi.conf [trunkgroups] [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no progzone=us tonezone=0 jbenable=yes ;Sangoma AFT-A200 [slot:4 bus:5 span:1] <wanpipe1> context=default group=0 echocancel=yes signalling=fxs_ks channel => 1 context=default group=0 echocancel=yes signalling=fxs_ks channel => 2 dahdi show version DAHDI Version: 2.1.0.4 Echo Canceller: MG2 dahdi show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO wrtdm Board 1 OK 0 0 0 CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1) dahdi show channels Chan Extension Context Language MOH Interpret Blocked State pseudo from-zaptel default In Service 1 default default In Service 2 default default In Service Whenever asterisk starts or chan_dahdi.so is reloaded I get the following: [Feb 24 15:23:41] WARNING[10206]: chan_dahdi.c:14304 process_dahdi: Ignoring signalling at line 38. -- Reconfigured channel 1, FXS Kewlstart signalling [Feb 24 15:23:41] WARNING[10206]: chan_dahdi.c:14304 process_dahdi: Ignoring signalling at line 44. -- Reconfigured channel 2, FXS Kewlstart signalling My goal is: 1) Get Dialtone for my analog phone. 2) Be able to send and make calls from my analog phone 3) Be able to receive and send faxes from my fax machine My service provider is VOIP, so I will never be getting or sending calls from/to the traditional telco. But I do believe I should be able to send and receive calls from this device out to my SIP provider. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
