On Thu, Feb 26, 2009 at 08:41:25AM +0200, Oguzhan Kayhan wrote: > >> Oguzhan Kayhan wrote: > >>> I want to change it to E1 instead of T1. > >>> here comes the problem. > >>> > >> > >> If it's anything like the older cards, there is a jumper on the card > >> that sets it to T1/E1 > >> > >> Doug > >> > > Yes, > > I just noticed the jumper on the card. > > Thanks a lot. > > > > > Yes i changed the jumper to enable E1. > dahdi_scan shows the following > [1] > active=yes > alarms=UNCONFIGURED > description=Wildcard TE121 Card 0 > name=WCT1/0 > manufacturer=Digium > devicetype=Wildcard TE121 with VPMADT032 > location=PCI Bus 04 Slot 09 > basechan=1 > totchans=31 > irq=17 > type=digital-E1 > syncsrc=0 > lbo=0 db (CSU)/0-133 feet (DSX-1) > coding_opts=HDB3 > framing_opts=CCS,CRC4 > coding= > framing= > > But when i try to run dahdi_genconf i got the following error. > > 31 channels in a T1 span at /usr/local/share/perl/5.10.0/Dahdi/Span.pm > line 244. > > dahdi_hardware > 31 channels in a T1 span at /usr/local/share/perl/5.10.0/Dahdi/Span.pm > line 244. > > > What should i do about it?
I believe it was resolved with: http://svn.digium.com/view/dahdi?view=revision&revision=5626 http://svn.digium.com/view/dahdi/tools/trunk/xpp/perl_modules/Dahdi/Span.pm?r1=5452&r2=5626 What version of the tools do you use? -- Tzafrir Cohen icq#16849755 jabber:[email protected] +972-50-7952406 mailto:[email protected] http://www.xorcom.com iax:[email protected]/tzafrir _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
