hi Grygoriy :
appreciate your reply ,
that's my cli command:
CLI> zap show status
Description Alarms IRQ bpviol CRC4
ZTDUMMY/1 1 UNCONFIGUR 0 0 0
Is't all right? forward your echo .
thanks
2009-03-04
邱磊
发件人： Grygoriy Dobrovolskyy
发送时间： 2009-03-03 18:53:47
收件人： Asterisk Users Mailing List - Non-Commercial Discussion
抄送：
主题： Re: [asterisk-users] after install the zaptel but the rtp failed
2009/3/3 邱磊 <[email protected]>
hi everyone:
now ,i have a strange situation: I want to make a meetme conference and install
the zaptel1.4* in my asterisk.
every things seem well but it did't work normally.
I use the Playback app for test .It didn't reply any voice.I tried in another
asterisk server the playback app work well.
i don't know why ,any some guys can give me some help?
PS: my meetme app also didn't work normally:
the asterisk log show:
Executing [4...@4105:2] MeetMe("SIP/22479-08203390", "4105|Ap") in new stack
without create 4105 room!!
but i have config the meetme.conf
[rooms]
conf =>4105;
can some guys give me help!! thanks a lot
2009-03-03
Check if your ztdummy is loaded "zap show status" in cli, or that you have a
proper source of timing.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
