Useful VIM command:
:%s/#\[.;3.;40m//g
On Tue, Mar 10, 2009 at 10:03:03AM -1000, Aqua Man wrote:
>
> Typed the dahdi restart command and the output is listed in the
> email as per your request.
>
> *CLI> dahdi restart
> Destroying channels and reloading DAHDI configuration.
> Initial softhangup of all DAHDI channels complete.
> Final softhangup of all DAHDI channels complete.
> == Unregistered channel -2
> == Unregistered channel 1
> == Unregistered channel 4
> == Parsing '/etc/asterisk/chan_dahdi.conf': Found
> [Mar 10 15:39:56] WARNING[4633]: chan_dahdi.c:930 dahdi_open: Unable to
> specify channel 1: Device or resource busy
Huh?
Any chance there's a different instance of Asterisk running?
ps aux | grep asterisk
But see also further below,
> chan_dahdi.c:930 dahdi_open: Unable to specify channel 1: Device or resource
> busy
> -- Reconfigured channel 1, FXO Kewlstart signalling
> -- Reconfigured channel 4, FXS Kewlstart signalling
> == Parsing '/etc/asterisk/users.conf': Found
> *CLI> -- Starting simple switch on 'Zap/1-1'
> -- Executing [18005551...@default:1] Dial("Zap/1-1",
> "DAHDI/4/wwwww13475823549") in new stack
> [Mar 10 15:40:15] WARNING[4679]: channel.c:3168 ast_request: No channel type
> registered for 'DAHDI'
> [Mar 10 15:40:15] WARNING[4679]: app_dial.c:1286 dial_exec_full: Unable to
> create channel of type 'DAHDI' (cause 66 - Channel not implemented)
> == Everyone is busy/congested at this time (1:0/0/1)
> -- Executing [18005551...@default:2] Hangup("Zap/1-1", "") in new stack
> == Spawn extension (default, 13475823549, 2) exited non-zero on 'Zap/1-1'
> -- Hungup 'Zap/1-1'
> -- Starting simple switch on 'Zap/1-1'
> -- Hungup 'Zap/1-1'
>
>
> sudo cat /proc/dahdi/*
> Span 1: wctdm/4 'wildcard tdm400p rev I board 5' (master)
>
> 1 wctdm/4/0 fxoks (ec: mg2)
> 2 wctdm/4/1
> 3 wctdm/4/2
> 4 wctdm/4/3/ fxsks (ec:mg2)
Are all of those lower case?
No '(In Use)'
>
>
> [channels]
> usecallerid=yes
> callerid=asreceived
> cidsignalling=bell
> hidecallerid=no
> callwaiting=yes
> musiconhold=default
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=400
> rxgain=0.0
> txgain=0.0
> signalling=fxo_ks
> language=en
> context=default
> channel => 1
An FXO channel should have FXS signalling ...
> signalling=fxs_ks
> channel => 4
... and vice versa
>
> I used same settings from zapata.conf. This worked fine before the dahdi.
> Any help would much appreciated
>
>
>
>
>
>
>
>
> > Date: Tue, 10 Mar 2009 18:37:35 +0200
> > From: tzafrir.co...@xorcom.com
> > To: asterisk-users@lists.digium.com
> > Subject: Re: [asterisk-users] configuring channels for dahdi
> >
> > On Tue, Mar 10, 2009 at 04:20:47AM -1000, Aqua Man wrote:
> > >
> > > after installing asterisk 1.4.23.1 and dahdi-linux-2.1.0.4 and at CLI>
> > > module load chan_dahdi.so receive the following:
> > >
> > >
> > >
> > >
> > >
> > > signalling must be specified before any channels are.
> > >
> > >
> > >
> > >
> > >
> > > CLI> Warning [4663]: chan_dahdi.c:11627 process_dahdi: Ignoring signalling
> > >
> > >
> > > Error[4663]: chan_dahdi.c:10946 build_channels: Unable to
> > > reconfigure channel '1'
> >
> > You got the real error emssage on module load. The error message you get
> > now is:
> >
> > 1. chan_dahdi tells you that it does not change major configuration on
> > reload
> >
> > 2. And that its configuration is still broken.
> >
> > Try e.g. 'dahdi restart' from the Asterisk CLI to get the real error.
> >
> > For more help in troubleshooting, also provide your zapata.conf /
> > chan_dahdi.conf as well as the output of: cat /proc/dahdi/* (or
> > /proc/zaptel/* if you use Zaptel)
> >
> > --
> > Tzafrir Cohen
> > icq#16849755 jabber:tzafrir.co...@xorcom.com
> > +972-50-7952406 mailto:tzafrir.co...@xorcom.com
> > http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
> >
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _________________________________________________________________
> Hotmail® is up to 70% faster. Now good news travels really fast.
> http://windowslive.com/online/hotmail?ocid=TXT_TAGLM_WL_HM_70faster_032009
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406 mailto:tzafrir.co...@xorcom.com
http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
