>>> On Mon, Mar 16, 2009 at 6:42 PM, Pascal Bruno <[email protected]> wrote:
>>>> I have a weird problem with call using my T1 card. I can make calls
>>>> fine using my analog and IP phones, but when I try to initiate a call
>>>> using a .call file, I get the following error
>>>>
>>>> -- Attempting call on DAHDI/g1/1XXXXXXXXXX for s...@test:1 (Retry 1)
>>>> -- Requested transfer capability: 0x00 - SPEECH
>>>> -- PROGRESS with cause code 127 received
>>>>
>>>> it happens on certain numbers I dial, but if I dial that same number
>>>> with an ip or analog phone that use the T1 channel, the call is going
>>>> through normally.
On Wed, 18 Mar 2009, Pascal Bruno wrote:
> This has to be a bug, because I dont know what else to try here
Your logic is flawed.
I'm a 1.2 Luddite, but it may help if you ramp up logging in logger.conf
like:
console = debug,dtmf,error,event,info,notice,verbose,warning
And then (after "logger reload") capture the log from both a "dialed" and
a "call file" call.
Also, what does the call file look like?
Thanks in advance,
------------------------------------------------------------------------
Steve Edwards [email protected] Voice: +1-760-468-3867 PST
Newline Fax: +1-760-731-3000
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
