----- Original Message ----- From: "Michael" <[EMAIL PROTECTED]>
Sent: Thursday, January 08, 2004 10:40 PM
if you are on a call on the Budgetone 101 and a 2nd call is received,
instead
of a call waiting beep being played, it rings on the handset speaker!
which
makes it almost impossible to speak to the 1st caller
True. Alas this is an irritating bit about the implementation of call waiting on the GS
but if you hang up
the
1st call, the phone rings and it is possible to answer the 2nd call
normally.
Anyone got any ideas on what could be causing these problems ?
I'm not sure that I would call item#2 a problem.
Hi Michael,
GS does not really support callwaiting
Not so true. On all of my GS phones (20), I now, after discovering 2 separate problems, have call waiting working with the flash key. It works on all versions of the firmware that I have tested after '3.81. Press once, puts 1st call on hold, answers 2nd call. Press again, puts second caller on hold, returns to first caller, etc. The first problem I had was misconfiguration of the "send flash as DTMF event" option. For call waiting to work, you must have this option set to false in the phone configuration.
(By the way, the other problem I had was a hardware problem on one phone: hot melt glue all over the keypad contact area.)
and you don't have the ability to
disable from the phone configuration. You can however disable in '*', by adding "incominglimit=1" for each GS phone in sip.conf. Also ensure that you a "username=blah" where blah is the same as your phone definition. HTH.
Alas, also true.
Stephen R. Besch
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
