Testing between ATA and Asterisk is working fine. I am getting voicemail etc. But when I'm trying to call to the "carrier side" i find it not working. I see on my Cisco gateway that it negotiated the g711ulaw codec, but when the "state" goes into active, I just automatically get busy tone from my ATA. It looks like that the ATA-* leg is disconnected while *-CiscoGateway is still trying to connect. My ATA is setup as g711ulaw (using Txcodec:2, Rxcodec:2).
Probably * is trying to negotiate with ATA using GSM codec? Is there a command in * (or * utility) that I can use to debug the codec negotiation, and/or the RTP status? My sip and exten are as follows: sip.conf -------- [general] port = 5060 bindaddr = 0.0.0.0 context = siptest tos=lowdelay tos=184 maxexpirey=3600 disallow=all allow=gsm allow=ulaw register => [EMAIL PROTECTED] nat=yes query=yes autocreatepeer=yes [carrier] type=friend fromdomain=mydomain host=<X.X.X.X - carrier IP> extensions.conf ---------------- ;extension exten => 1234,1,Dial(SIP/1234,10,tr) exten => 1234,2,Voicemail,u1234 exten => 1234,102,Voicemail,b1234 ;oubound to carrier exten => _011.,1,Dial(SIP/[EMAIL PROTECTED],tr) ;getting voicmails exten => 73*,1,VoicemailMain ----- Original Message ----- From: "Arslan Saeed" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, January 08, 2004 6:55 PM Subject: RE: [Asterisk-Users] * and Cisco Gateways Hi, Send me your * configuration u r using for troubleshooting this problem. Arslan. -----Original Message----- From: Jess Magnaye [mailto:[EMAIL PROTECTED] Sent: Friday, January 09, 2004 1:37 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] * and Cisco Gateways Importance: High That didn't work. I ran tcpdump and looks like looks like my Linux has problems with its on-board Ethernet. I'm getting the following error, which most likely is the reason for no audio. 14:40:57.628080 asterisk > cisco: icmp: asterisk udp port 13696 unreachable [tos 0xd4] 14:40:58.275665 asterisk > cisco: icmp: asterisk udp port 13697 unreachable [tos 0xc0] 14:40:58.622308 asterisk > cisco: icmp: asterisk udp port 13696 unreachable [tos 0xd4] I am now installing a new linux with (pci-ethernet) to load the *. I hope when I'm done, things will go smoothly. ----- Original Message ----- From: "John Todd" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, January 08, 2004 1:32 PM Subject: Re: [Asterisk-Users] * and Cisco Gateways > >Anybody on the list who implemented Cisco ATA + * + Cisco 2600? I > >cannot get my calls from ATA to terminate to the Cisco gateway via > >*. I am not sure if it is my hardware problem. I'm getting the > >following "codec negotiation problem" from Cisco. > > > >23:39:08: Unexpected VoIPCodec Type :g729br8 > >23:39:08: Unexpected VoIPCodec Type :gsmefr > > > > > >I appreciate any help I can get. Thanks. > > Go into sip.conf, and add these lines to the SIP peer for your Cisco 2600: > > disallow=all > allow=ulaw > allow=alaw > > > This will force G.711 codec usage, which may solve your problems > though it will increase your bandwidth. > > JT > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
