Show us your dialplan. -----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Bruce Thayre Sent: Monday, March 30, 2009 4:16 PM To: asterisk-users@lists.digium.com Subject: [asterisk-users] Newbie trying to make calls outside via digiumcard and POTS line
Hello, This is my first asterisk installation, and having read up on the documentation, and trying several tutorials i'm unable to get my outbound route working. I'm certain it's an issue with my configuration and my inexperience with asterisk. So i have my POTS phone connected to my digium card, and when i make a call, I receive the "cannot be completed as dialed" message. The log for the event in question is: [Mar 30 10:51:22] VERBOSE[1944] logger.c: -- Starting simple switch on 'Zap/3-1' [Mar 30 10:51:30] VERBOSE[1944] logger.c: -- Executing [18585300...@from-internal:1] ResetCDR("Zap/3-1", "") in new stack [Mar 30 10:51:30] VERBOSE[1944] logger.c: -- Executing [18585300...@from-internal:2] NoCDR("Zap/3-1", "") in new stack [Mar 30 10:51:30] VERBOSE[1944] logger.c: -- Executing [18585300...@from-internal:3] Wait("Zap/3-1", "1") in new stack [Mar 30 10:51:31] VERBOSE[1944] logger.c: -- Executing [18585300...@from-internal:4] Playback("Zap/3-1", "silence/1&cannot-complete-as-dialed&check-number-dial-again|noanswer") in new stack [Mar 30 10:51:31] VERBOSE[1944] logger.c: -- <Zap/3-1> Playing 'silence/1' (language 'en') [Mar 30 10:51:32] VERBOSE[1944] logger.c: -- <Zap/3-1> Playing 'cannot-complete-as-dialed' (language 'en') [Mar 30 10:51:34] VERBOSE[1944] logger.c: -- <Zap/3-1> Playing 'check-number-dial-again' (language 'en') [Mar 30 10:51:37] VERBOSE[1944] logger.c: -- Executing [18585300...@from-internal:5] Wait("Zap/3-1", "1") in new stack [Mar 30 10:51:38] VERBOSE[1944] logger.c: -- Executing [18585300...@from-internal:6] Congestion("Zap/3-1", "20") in new stack [Mar 30 10:51:39] VERBOSE[1944] logger.c: == Spawn extension (from-internal, 18585300400, 6) exited non-zero on 'Zap/3-1' [Mar 30 10:51:39] VERBOSE[1944] logger.c: -- Executing [...@from-internal:1] Macro("Zap/3-1", "hangupcall") in new stack [Mar 30 10:51:39] VERBOSE[1944] logger.c: -- Executing [...@macro-hangupcall:1] ResetCDR("Zap/3-1", "w") in new stack [Mar 30 10:51:39] DEBUG[1944] app_macro.c: Executed application: ResetCDR [Mar 30 10:51:39] VERBOSE[1944] logger.c: -- Executing [...@macro-hangupcall:2] NoCDR("Zap/3-1", "") in new stack [Mar 30 10:51:39] DEBUG[1944] app_macro.c: Executed application: NoCDR [Mar 30 10:51:39] VERBOSE[1944] logger.c: -- Executing [...@macro-hangupcall:3] GotoIf("Zap/3-1", "1?skiprg") in new stack [Mar 30 10:51:39] VERBOSE[1944] logger.c: -- Goto (macro-hangupcall,s,6) [Mar 30 10:51:39] DEBUG[1944] app_macro.c: Executed application: GotoIf [Mar 30 10:51:39] VERBOSE[1944] logger.c: -- Executing [...@macro-hangupcall:6] GotoIf("Zap/3-1", "1?skipblkvm") in new stack [Mar 30 10:51:39] VERBOSE[1944] logger.c: -- Goto (macro-hangupcall,s,9) [Mar 30 10:51:39] DEBUG[1944] app_macro.c: Executed application: GotoIf [Mar 30 10:51:39] VERBOSE[1944] logger.c: -- Executing [...@macro-hangupcall:9] GotoIf("Zap/3-1", "1?theend") in new stack [Mar 30 10:51:39] VERBOSE[1944] logger.c: -- Goto (macro-hangupcall,s,11) [Mar 30 10:51:39] DEBUG[1944] app_macro.c: Executed application: GotoIf [Mar 30 10:51:39] VERBOSE[1944] logger.c: -- Executing [...@macro-hangupcall:11] Hangup("Zap/3-1", "") in new stack [Mar 30 10:51:39] VERBOSE[1944] logger.c: == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'Zap/3-1' in macro 'hangupcall' [Mar 30 10:51:39] VERBOSE[1944] logger.c: == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'Zap/3-1' [Mar 30 10:51:39] VERBOSE[1944] logger.c: -- Hungup 'Zap/3-1' [Mar 30 10:51:43] DEBUG[2857] chan_zap.c: Message status for 4...@default changed from -1 to 0 on 3 Up to this point, all i have set up are two SIP phones, my POTS phone, and 1 ring group. My POTS line is connected to channel 1, and my POTS phone is connected on channel 3. Perhaps my understanding of how the calls are handled is flawed, but it seems to me that: 1. I dial a number on my POTS phone 2. Using the number, asterisk should match it against the dialing rules i have set 3. Having matched the number to an outbound dialing rule, it routes the call to the outside trunk and bingo bango i'm talking on the phone with someone outside my office However in this situation, it doesn't seem to work. And lines like "[18585300...@from-internal:6] Congestion("Zap/3-1", "20") in new stack" are a mystery to me. If any additional information is needed just let me know what, and i'll post it. Any help would be greatly appreciated as i'm kind of stuck on at this point. Thanks!!!! _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users