Follow instructions from the following line to configure Asterisk 1.2 with zaptel drivers for the X100P. If you are using dahdi-linux drivers instead of zaptel, then instead of zaptel.conf you need to have a properly configured /etc/dahdi/system.conf and instead of /etc/asterisk/zapata.conf use this file instead /etc/asterisk/chan_dahdi.conf.
http://users.telenet.be/Asterisk-PBX/InstallWildcard.htm Since it sounds like you have not used Asterisk before, you should read "Asterisk: the future of telephony <http://astbook.asteriskdocs.org/> and look through the pages at voip-info.org to get started. 2009/4/2 Manolet Gmail <[email protected]> > system.conf: > > # Global data > > loadzone = us > defaultzone = us > > el archivo /etc/asterisk/chan/dahdi.conf no existe, estoy usando > asterisk 1.2 de todas maneras como dije ztcfg -v tampoco muestra la > tarjeta, asi que de ninguna forma la va a ver asterisk, si hago en > asterisk dahdi show channels no aparece nada. > > 2009/4/2 Brandon B. <[email protected]>: > > nos muestran la configuración de sus líneas de /etc/dahdi/system.conf y > > /etc/asterisk/chan/dahdi.conf > > > > > > > > 2009/4/2 Manolet Gmail <[email protected]> > >> > >> Tengo en una maquia ubuntu 8.10 el kernel es Linux 2.6.27-14-generic > >> > >> Quiero configurar una tarjeta x100p i usarla con asterisk, asi que > >> descague compile e instale lo siguiente: > >> > >> asterisk-1.4.24 > >> dahdi-linux-2.1.0.4 > >> dahdi-tools-2.1.0.2 > >> libpri-1.4.9 > >> > >> Sin embargo no logro configurar la tarjeta con exito, ya probe casi > todo. > >> > >> Esto aparece si ejecuto lspci: > >> 04:06.0 Communication controller: Motorola Wildcard X100P > >> > >> dahdi_hardware me muestra: > >> pci:0000:04:06.0 wcfxo- 1057:5608 Wildcard X100P > >> > >> dahdi_cfg -v : > >> DAHDI Tools Version - 2.1.0.2 > >> > >> DAHDI Version: 2.1.0.4 > >> Echo Canceller(s): > >> Configuration > >> ====================== > >> > >> > >> 0 channels to configure. > >> > >> dahdi_scan: > >> [1] > >> active=yes > >> alarms=UNCONFIGURED > >> description=DAHDI_DUMMY/1 (source: HRtimer) 1 > >> name=DAHDI_DUMMY/1 > >> manufacturer= > >> devicetype=DAHDI Dummy Timing > >> location= > >> basechan=1 > >> totchans=0 > >> irq=0 > >> > >> Nada parece funcionar y realmente no se donde esta el error... alguna > >> idea? > >> > >> _______________________________________________ > >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > >> > >> asterisk-users mailing list > >> To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
