Hello! Everything is in order...I became confused between the chan-dahdi.conf and dahdi-channels.conf files.
Thanks! Elliot On Fri, Apr 3, 2009 at 3:37 AM, Martin <[email protected]> wrote: > make it asterisk -vvvc (CONSOLE MODE) > > > On Thu, Apr 2, 2009 at 7:36 PM, Martin <[email protected]> wrote: >> ok, >> >> 1) you're missing switchtype=euroisdn ... >> >> 2) >> so edit /etc/asteirsk/logger.conf make sure console => is not >> commented out; if it is then uncomment >> >> service asterisk stop >> asterisk -vvvng >> CLI>unload chan_zap.so >> CLI>load chan_zap.so >> >> it will tell you now what's the problem with registering the channels >> >> Martin >> >> On Thu, Apr 2, 2009 at 7:18 PM, Elliot Murdock <[email protected]> wrote: >>> Hello! >>> >>> Here is all I got: >>> >>> system.info: >>> >>> span=1,1,0,ccs,hdb3,crc4 >>> bchan=1-15 >>> dchan=16 >>> bchan=17-31 >>> span=2,2,0,ccs,hdb3,crc4 >>> bchan=32-46 >>> dchan=47 >>> bchan=48-62 >>> >>> >>> dahdi_channels.conf: >>> ;This context forwarding incoming calls to SIP server on group (1), >>> channels 1-31 >>> context=default >>> ;singnalling type >>> signalling=pri_cpe >>> accountcode=11 >>> group = 1 >>> channel => 1-15 >>> channel => 17-31 >>> >>> ;other contexts add here >>> context=default >>> signalling=pri_cpe >>> resetinterval=never >>> group = 2 >>> channel => 32-46 >>> channel => 48-62 >>> >>> dahdi_scan: >>> >>> [1] >>> active=yes >>> alarms=RED >>> description=T2XXP (PCI) Card 0 Span 1 >>> name=TE2/0/1 >>> manufacturer=Digium >>> devicetype=Wildcard TE220 (4th Gen) >>> location=Board ID Switch 0 >>> basechan=1 >>> totchans=31 >>> irq=16 >>> type=digital-E1 >>> syncsrc=0 >>> lbo=0 db (CSU)/0-133 feet (DSX-1) >>> coding_opts=HDB3 >>> framing_opts=CCS,CRC4 >>> coding=HDB3 >>> framing=CCS >>> [2] >>> active=yes >>> alarms=RED >>> description=T2XXP (PCI) Card 0 Span 2 >>> name=TE2/0/2 >>> manufacturer=Digium >>> devicetype=Wildcard TE220 (4th Gen) >>> location=Board ID Switch 0 >>> basechan=32 >>> totchans=31 >>> irq=16 >>> type=digital-E1 >>> syncsrc=0 >>> lbo=0 db (CSU)/0-133 feet (DSX-1) >>> coding_opts=HDB3 >>> framing_opts=CCS,CRC4 >>> coding=HDB3 >>> framing=CCS >>> >>> dahdi_cfg -vv: >>> DAHDI Tools Version - 2.1.0.2 >>> >>> DAHDI Version: 2.1.0.4 >>> Echo Canceller(s): MG2 >>> Configuration >>> ====================== >>> >>> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) >>> SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) >>> >>> Channel map: >>> >>> Channel 01: Clear channel (Default) (Slaves: 01) >>> Channel 02: Clear channel (Default) (Slaves: 02) >>> Channel 03: Clear channel (Default) (Slaves: 03) >>> Channel 04: Clear channel (Default) (Slaves: 04) >>> Channel 05: Clear channel (Default) (Slaves: 05) >>> Channel 06: Clear channel (Default) (Slaves: 06) >>> Channel 07: Clear channel (Default) (Slaves: 07) >>> Channel 08: Clear channel (Default) (Slaves: 08) >>> Channel 09: Clear channel (Default) (Slaves: 09) >>> Channel 10: Clear channel (Default) (Slaves: 10) >>> Channel 11: Clear channel (Default) (Slaves: 11) >>> Channel 12: Clear channel (Default) (Slaves: 12) >>> Channel 13: Clear channel (Default) (Slaves: 13) >>> Channel 14: Clear channel (Default) (Slaves: 14) >>> Channel 15: Clear channel (Default) (Slaves: 15) >>> Channel 16: D-channel (Default) (Slaves: 16) >>> Channel 17: Clear channel (Default) (Slaves: 17) >>> Channel 18: Clear channel (Default) (Slaves: 18) >>> Channel 19: Clear channel (Default) (Slaves: 19) >>> Channel 20: Clear channel (Default) (Slaves: 20) >>> Channel 21: Clear channel (Default) (Slaves: 21) >>> Channel 22: Clear channel (Default) (Slaves: 22) >>> Channel 23: Clear channel (Default) (Slaves: 23) >>> Channel 24: Clear channel (Default) (Slaves: 24) >>> Channel 25: Clear channel (Default) (Slaves: 25) >>> Channel 26: Clear channel (Default) (Slaves: 26) >>> Channel 27: Clear channel (Default) (Slaves: 27) >>> Channel 28: Clear channel (Default) (Slaves: 28) >>> Channel 29: Clear channel (Default) (Slaves: 29) >>> Channel 30: Clear channel (Default) (Slaves: 30) >>> Channel 31: Clear channel (Default) (Slaves: 31) >>> Channel 32: Clear channel (Default) (Slaves: 32) >>> Channel 33: Clear channel (Default) (Slaves: 33) >>> Channel 34: Clear channel (Default) (Slaves: 34) >>> Channel 35: Clear channel (Default) (Slaves: 35) >>> Channel 36: Clear channel (Default) (Slaves: 36) >>> Channel 37: Clear channel (Default) (Slaves: 37) >>> Channel 38: Clear channel (Default) (Slaves: 38) >>> Channel 39: Clear channel (Default) (Slaves: 39) >>> Channel 40: Clear channel (Default) (Slaves: 40) >>> Channel 41: Clear channel (Default) (Slaves: 41) >>> Channel 42: Clear channel (Default) (Slaves: 42) >>> Channel 43: Clear channel (Default) (Slaves: 43) >>> Channel 44: Clear channel (Default) (Slaves: 44) >>> Channel 45: Clear channel (Default) (Slaves: 45) >>> Channel 46: Clear channel (Default) (Slaves: 46) >>> Channel 47: D-channel (Default) (Slaves: 47) >>> Channel 48: Clear channel (Default) (Slaves: 48) >>> Channel 49: Clear channel (Default) (Slaves: 49) >>> Channel 50: Clear channel (Default) (Slaves: 50) >>> Channel 51: Clear channel (Default) (Slaves: 51) >>> Channel 52: Clear channel (Default) (Slaves: 52) >>> Channel 53: Clear channel (Default) (Slaves: 53) >>> Channel 54: Clear channel (Default) (Slaves: 54) >>> Channel 55: Clear channel (Default) (Slaves: 55) >>> Channel 56: Clear channel (Default) (Slaves: 56) >>> Channel 57: Clear channel (Default) (Slaves: 57) >>> Channel 58: Clear channel (Default) (Slaves: 58) >>> Channel 59: Clear channel (Default) (Slaves: 59) >>> Channel 60: Clear channel (Default) (Slaves: 60) >>> Channel 61: Clear channel (Default) (Slaves: 61) >>> Channel 62: Clear channel (Default) (Slaves: 62) >>> >>> 62 channels to configure. >>> >>> But, "pri show spans", nothing shows up. >>> >>> Thanks! >>> Elliot >>> On Fri, Apr 3, 2009 at 3:08 AM, Martin <[email protected]> wrote: >>>> maybe you have to call the dahdi_scan with some argument to >>>> autogenerate config files ... >>>> >>>> for any dahdi T1/E1 card you have to work properly you have to have >>>> /etc/dahdi/system.conf >>>> configured with span= and bchan= and dchan= keyword >>>> and /etc/asterisk/dahdi*.conf with channel => keyword. >>>> >>>> check it out ... this is the first step... >>>> >>>> dahdi_cfg -vv should show all your 64 channels >>>> >>>> Martin >>>> >>>> On Thu, Apr 2, 2009 at 6:36 PM, Elliot Murdock <[email protected]> wrote: >>>>> Hello! >>>>> >>>>> I am trying to configure my digium TE220 dual-span pci express card >>>>> with Dahdi. I seemed to have managed to set up the card with the >>>>> Dahdi kernel, as demonstrated by executing dahdi_scan: >>>>> >>>>> [1] >>>>> active=yes >>>>> alarms=RED >>>>> description=T2XXP (PCI) Card 0 Span 1 >>>>> name=TE2/0/1 >>>>> manufacturer=Digium >>>>> devicetype=Wildcard TE220 (4th Gen) >>>>> location=Board ID Switch 0 >>>>> basechan=1 >>>>> totchans=31 >>>>> irq=16 >>>>> type=digital-E1 >>>>> syncsrc=0 >>>>> lbo=0 db (CSU)/0-133 feet (DSX-1) >>>>> coding_opts=HDB3 >>>>> framing_opts=CCS,CRC4 >>>>> coding=HDB3 >>>>> framing=CCS >>>>> [2] >>>>> active=yes >>>>> alarms=RED >>>>> description=T2XXP (PCI) Card 0 Span 2 >>>>> name=TE2/0/2 >>>>> manufacturer=Digium >>>>> devicetype=Wildcard TE220 (4th Gen) >>>>> location=Board ID Switch 0 >>>>> basechan=32 >>>>> totchans=31 >>>>> irq=16 >>>>> type=digital-E1 >>>>> syncsrc=0 >>>>> lbo=0 db (CSU)/0-133 feet (DSX-1) >>>>> coding_opts=HDB3 >>>>> framing_opts=CCS,CRC4 >>>>> coding=HDB3 >>>>> framing=CCS >>>>> >>>>> However, when calling a "pri show spans" in asterisk, nothing comes >>>>> up. Although the physical cables are not yet connected, shouldn't it >>>>> state something like: >>>>> >>>>> PRI span 1/0: Provisioned, In Alarm, Down, Active >>>>> PRI span 2/0: Provisioned, In Alarm, Down, Active >>>>> >>>>> Any help will be appreciated! >>>>> Elliot >>>>> >>>>> _______________________________________________ >>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>>> >>>>> asterisk-users mailing list >>>>> To UNSUBSCRIBE or update options visit: >>>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>>> >>>> >>>> _______________________________________________ >>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>> >>>> asterisk-users mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>> >>> >>> _______________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
