Thanks for the reply Martin. I'm pretty sure that we are running dahdi (see below). Could the problem be that I didn't remove the Zaptel libraries prior to compiling Asterisk? If that's the case I should be able to rerun the ./configure without the zaptel libs and see if that fixes it. I'm just not sure what it checks for though. I did set the dahdichanname=no in the asterisk.conf if that makes any difference. It seemed to in calling the channel in the dialplan but didn't seem to effect the meetme app.
Thanks, Dave Relevent bits from lsmod Module Size Used by dahdi_dummy 38984 0 dahdi_echocan_mg2 39048 0 xpp_usb 52304 0 xpp 226468 1 xpp_usb wctc4xxp 83392 0 dahdi_transcode 42376 1 wctc4xxp wcb4xxp 110756 0 wctdm 73804 0 wcfxo 47136 0 wctdm24xxp 159332 0 wcte11xp 59936 0 wct1xxp 48544 0 wcte12xp 102404 0 wct4xxp 349696 24 dahdi 232144 66 dahdi_dummy,dahdi_echocan_mg2,xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,wct4xxp >From the console... asterisk*CLI> dahdi show status Description Alarms IRQ bpviol CRC4 T2XXP (PCI) Card 0 Span 1 OK 0 0 0 T2XXP (PCI) Card 0 Span 2 RED 0 0 0 On Thu, Apr 2, 2009 at 9:40 PM, Martin <[email protected]> wrote: > That's very strange ... the code when is compiling checks whether > zaptel is present and then > the #define HAVE_ZAPTEL is set. > > Since your error says No "ZAP" channel ... > > and the code says > > ast_log(LOG_WARNING, "No %s channel available for conference, user > introduction disabled\n", dahdi_chan_name); > > and > > in main/asterisk.c > > > #ifdef HAVE_ZAPTEL > static char _dahdi_chan_name[AST_CHANNEL_NAME] = "Zap"; > #else > static char _dahdi_chan_name[AST_CHANNEL_NAME] = "DAHDI"; > #endif > > I deduct from that ... that you're still running zaptel and not dahdi. > Because your log should say "No DAHDI channel available ..." UNLESS > for some reason you only compiled > chan_dahdi.so and copied it manually leaving the old app_meetme.so > with HAVE_ZAPTEL flag... > > paste your lsmod output > > Martin > > -- David Poirier
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
