Sounds like a protocol variant issue. Is the telco supposed to send you ANI?
You have 2 options, the first option is to try with the ITU variant, if that does not work, set the option mfcr2_skip_category=yes and see if that helps. Moy On Wed, Apr 8, 2009 at 6:06 PM, Giovanny Magallanes <[email protected]> wrote: > > Hi, > > I have installed Elastix 1.5.2 (Barranquilla, Colombia (TELCO: METROTEL)) > with a TE220P (2xE1) and TDM2400P (16FXS), openr2 is included in 1.5.2 > version. The outcoming calls are ok, but with incoming call i have an error: > > ERROR[14972] chan_dahdi.c: Chan 2 - Protocol error. Reason = Multi Frequency > Cycle Timeout, R2 State = > Seize ACK Transmitted, MF state = Category Request Transmitted, MF Group = > Backward Group A, CAS = 0x00 > DNIS = 310, ANI = , MF = 0x20 > > I tried with all protocol variants availables, because seems thats the > cause, but I still have the problem. > > elastix*CLI> mfcr2 show variant > Variant Code Country > AR Argentina > BR Brazil > CN China > CZ Czech Republic > CO Colombia > EC Ecuador > ITU International Telecommunication Union > MX Mexico > PH Philippines > VE Venezuela > elastix*CLI> > > > > The following link has the content of files: chan_dahdi.conf, system.conf, > and a tail of /var/log/asterisk/full > > http://pastebin.com/f3424b319 > > Is this really a variant protocol problem? Any suggest? > > Regards, > > > > GM > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- "I do not agree with what you have to say, but I’ll defend to the death your right to say it." Voltaire _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
