I have Asterisk 1.4.24 en a Digium TDM410 with EC and with 3 FXO modules. When I plug one PSTN-line into a FXO-port I am able to receive calls on this line and I can also make calls from an internal SIP-phone to the external PSTN-network.
Still I am bothered about something that appears on the CLI when I do a reload chan_dahdi.so : asterisk*CLI> reload chan_dahdi.so -- Reloading module 'chan_dahdi' (DAHDI Telephony w/PRI) == Parsing '/etc/asterisk/chan_dahdi.conf': Found [Apr 29 16:26:53] WARNING[8927]: chan_dahdi.c:11951 process_dahdi: Ignoring any changes to 'signalling' (on reload) [Apr 29 16:26:53] WARNING[8927]: chan_dahdi.c:4090 handle_alarms: Detected alarm on channel 1: Red Alarm -- Reconfigured channel 1, FXS Kewlstart signalling [Apr 29 16:26:53] WARNING[8927]: chan_dahdi.c:11951 process_dahdi: Ignoring any changes to 'signalling' (on reload) [Apr 29 16:26:53] WARNING[8927]: chan_dahdi.c:4090 handle_alarms: Detected alarm on channel 2: Red Alarm -- Reconfigured channel 2, FXS Kewlstart signalling [Apr 29 16:26:53] WARNING[8927]: chan_dahdi.c:11951 process_dahdi: Ignoring any changes to 'signalling' (on reload) -- Reconfigured channel 3, FXS Kewlstart signalling == Parsing '/etc/asterisk/users.conf': Found What about this "ignoring any changes to 'signalling' ??? It's not a notice, its really a warning... I would gladly see no warning at all when reloading DAHDI. This is my chan_dahdi.conf (created manually) : [trunkgroups] [channels] language=be busydetect=yes busycount=6 callerid=asreceived ;threewaycaling=yes transfer=yes ; Note that if any of your DAHDI cards have hardware echo cancellers, ; then this setting only turns them on and off. There are no special ; settings required for hardware echo cancellers; when present and ; enabled in their kernel modules, they take precedence over the ; software echo canceller compiled into DAHDI automatically. echocancel=yes ;internationalprefix: 00 ;nationalprefix:0 context=tel2268191 ; E.U. signalling=fxs_ks group=1 channel => 1 context=tel2362334 ; KMO signalling=fxs_ks group=1 channel => 2 context=telunknown signalling=fxs_ks group=1 channel => 3 This is what DAHDI config tells me : [r...@asterisk asterisk]# /usr/sbin/dahdi_cfg -vvv DAHDI Tools Version - 2.1.0.2 DAHDI Version: 2.1.0.4 Echo Canceller(s): Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) 3 channels to configure. It keeps telling me that the channels need to be configured, in stead of saying that my channels ARE configured. Thanks for the feedback ! Jonas.
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users