----- "Tzafrir Cohen" <tzafrir.co...@xorcom.com> wrote:
> On Fri, May 01, 2009 at 07:16:19AM +0100, --[ UxBoD ]-- wrote:
> > ----- "Tzafrir Cohen" <tzafrir.co...@xorcom.com> wrote:
> > > On Mon, Apr 27, 2009 at 07:37:05AM +0100, --[ UxBoD ]-- wrote:
> > > > Hi,
> > > >
> > > > Built a new server at the weekend and install Asterisk 1.6.0.9 and
> > > > IAX and SIP work great :) The one problem I am having is getting the
> > > > OpenVox (TDM400 type card) to work. It is successfully identified
> > > > using WCTDM kernel module and dahdi_scan picks it up just fine.
> > > > The issue is when I try and setup dahdi_channel.conf as it fails
> > > > everytime.
> > >
> > > What is dahdi_channel.conf ?
> > >
> > > What is the output of:
> > >
> > > lsdahdi
> > > asterisk -rx 'dahdi show channels'
> > >
> > > > When running asterisk -rvvvv I see the port pick up the ring but the
> > > > it shows a RED Alarm failure.
> > >
> > > RED alarm: nothing connected to the port (applies to FXO as well as to
> > > digital ports - E1, T1, J1, BRI).
> > >
> > >
> >
> > Sorry for the delay! Okay here is the information requested :-
> >
> > dahdi_chan.conf
> > ---------------
> > [channels]
> > group=0
> > language=en
> > context=inbound-dahdi
> > signalling=fxs_ks
> > dahdichan => 1
> >
> > lsdahdi
> > -------
> > [r...@voip asterisk]# lsdahdi
> > ### Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
> > 1 FXO FXSKS (In use) (SWEC: MG2) RED
> > 2 EMPTY
> > 3 EMPTY
> > 4 EMPTY
> >
> > [r...@voip asterisk]# asterisk -rx 'dahdi show channels'
> > Chan Extension Context Language MOH Interpret Blocked State
> > pseudo default default In Service
> > 1 inbound-dahdi en default In Service
> >
> >
> > Cable is plugged in fine, but when it tries to pick up the call I get :-
> >
> > [May 1 07:15:03] NOTICE[10601]: chan_dahdi.c:8164 handle_init_event: Alarm
> > cleared on channel 1
> > [May 1 07:15:04] WARNING[10601]: chan_dahdi.c:4664 handle_alarms: Detected
> > alarm on channel 1: Red Alarm
> >
> > Would be really nice to get this working and complete my VoIP installation
> > :(
>
> Is this a place where you get a polarity reversal event on call startup?
>
>
Hmmm, possibly :) I tried adding :-
usecallerid=yes
cidsignalling=v23
cidstart=polarity
to chan_dahdi.conf and now get :-
[May 1 08:12:33] NOTICE[10802]: chan_dahdi.c:8164 handle_init_event: Alarm
cleared on channel 1
[May 1 08:12:34] WARNING[10802]: chan_dahdi.c:4664 handle_alarms: Detected
alarm on channel 1: Red Alarm
== Starting post polarity CID detection on channel 1
-- Starting simple switch on 'DAHDI/1-1'
[May 1 08:12:39] NOTICE[10811]: chan_dahdi.c:7253 ss_thread: Got event 17
(Polarity Reversal)...
[May 1 08:12:41] WARNING[10811]: chan_dahdi.c:7311 ss_thread: CID timed out
waiting for ring. Exiting simple switch
-- Hungup 'DAHDI/1-1'
== Starting post polarity CID detection on channel 1
-- Starting simple switch on 'DAHDI/1-1'
[May 1 08:12:57] NOTICE[10813]: chan_dahdi.c:7253 ss_thread: Got event 17
(Polarity Reversal)...
[May 1 08:12:59] WARNING[10813]: chan_dahdi.c:7311 ss_thread: CID timed out
waiting for ring. Exiting simple switch
-- Hungup 'DAHDI/1-1'
== Starting post polarity CID detection on channel 1
Best Regards,
--
SplatNIX IT Services :: Innovation through collaboration
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
