Hi Jonas, Maybe you can try leaving out bindport and bindaddr parameters first. The port defaults to 4569 anyway. As for the bindaddr, you should be using the IP Address of your interfaces. I am assuming you are using the IP Address obtained from your router. If that is the case, then asterisk will not be able to bind to that address. Leaving out the parameter binds asterisk to all interfaces. Give that a try first and see if it solves your problem. If it does, then change bindaddr to your actual interface ip address.
Regards, Steve jonas kellens wrote: > I have connected my Asterisk-box directly to my internetconnection. I > have disabled my firewall. > > Still I am unable to register with my IAX-provider. Can someone > *please* point me out why I am unable to register my Asterisk to > another Asterisk-box ? > A RegReq is send to the other Asterisk-box but no reply is received... > No confirm, no reject... > > I have tried yet several configuration in my iax.conf file. > There is also always the "ignoring bindaddr" and "ignoring > bindport"... which doesn't sound right. > > What I know from books is that when you want to connect your Asterisk > to another Asterisk-box you need to describe this other Asterisk-box > as a peer. > So my iax.conf : > > [general] > autokill=yes > bindport=4569 > bindaddr=78.22.166.226 ; the IP-address I get from my ISP > > register => cstore:my-passw...@ip-of-other-iax-box > > [cstore] > type=user > trunk=yes > context=from-other-iax-box > disallow=all > allow=ulaw > allow=alaw > allow=gsm > > [attractel] ; name I use in extensions.conf to contact other iax-box > type=peer > host=ip-address > username=cstore ; username @ remote asterisk > secret=my-password ; pass @ remote Asterisk > auth=plaintext,md5 > trunk=yes > disallow=all > allow=ulaw > allow=alaw > allow=gsm > > IAX reload : > > asterisk*CLI> iax2 reload > == Parsing '/etc/asterisk/iax.conf': Found > [May 2 10:34:23] NOTICE[4626]: chan_iax2.c:10124 set_config: Ignoring > bindport on reload > [May 2 10:34:23] NOTICE[4626]: chan_iax2.c:10183 set_config: Ignoring > bindaddr on reload > > doing dnsmgr_lookup for '62.213.196.38' > == Parsing '/etc/asterisk/users.conf': Found > > doing dnsmgr_lookup for '62.213.196.38' > == Loaded firmware 'iaxy.bin' > == Parsing '/etc/asterisk/iaxprov.conf': Found > -- Loaded provisioning template 'default' > > Is ignoring bindaddr and bindport normal ????? > > IAX debug : > > Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: > REGREQ > Timestamp: 00019ms SCall: 13117 DCall: 00000 [62.213.196.38:4569] > USERNAME : cstore > REFRESH : 60 > > Tx-Frame Retry[001] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: > REGREQ > Timestamp: 00019ms SCall: 13117 DCall: 00000 [62.213.196.38:4569] > USERNAME : cstore > REFRESH : 60 > > Tx-Frame Retry[002] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: > REGREQ > Timestamp: 00019ms SCall: 13117 DCall: 00000 [62.213.196.38:4569] > USERNAME : cstore > REFRESH : 60 > > IAX status : > > asterisk*CLI> iax2 show registry > Host dnsmgr Username > Perceived Refresh State > 62.213.196.38:4569 N cstore <Unregistered> > 60 Request Sent > > Host dnsmgr Username > Perceived Refresh State > 62.213.196.38:4569 N cstore <Unregistered> > 60 Timeout > > > Thanks for the help, > Jonas. > ------------------------------------------------------------------------ > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
