Gavin, My Asterisk-server has 2 interfaces :
- eth0 = LAN-interface (for SIP-phones to register) - eth1 = WAN-interface (for IAX-trunking to IAX-provider) Asterisk is behind NAT (has internal IP-address 192.168.3.248 for WAN_if) SETUP : m0n0wall 192.168.3.250 -- 192.168.3.248 (WAN)-Asterisk-(LAN) 192.168.4.248 -- LAN-switch But removing the NAT and connecting directly to the internet does not make that my Asterisk-server gets registered with the Asterisk-box of my IAX-provider... If Asterisk only binds IAX to the eth0-interface... I can maybe change eth0 to be my WAN-interface (IAX), and eth1 to be my LAN-interface (SIP)... ?? Greetingz, Jonas. >----- Oorspronkelijk bericht ----- >Van : Gavin Henry [mailto:[email protected]] >Verzonden : maandag , mei 4, 2009 10:46 AM >Aan : 'Asterisk Users Mailing List - Non-Commercial Discussion' >Onderwerp : Re: [asterisk-users] Can someone help me with my IAX-registration > >Is your box on a public ip or via nat? If eth0 isn't the ip you set it >to bind on it will ignore it. > >I mean, is your * box on an internal address? > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
