hi Tony, Thanks for your reply
I tried with the same but it dont work for me and I used DAHDI channel and PRI following are mine chan_dahdi.conf setting [channels] language=en context=from-pstn switchtype=euroisdn pridialplan=local prilocaldialplan=local callerid=asreceived signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes resetinterval=never rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no group=0 channel => 1-15 channel => 17-31 On Thu, May 14, 2009 at 6:40 PM, Tony Mountifield <[email protected]>wrote: > In article <[email protected]>, > DHAVAL INDRODIYA <[email protected]> wrote: > > > > how can I set/get variable "USERUSERINFO" when Dialing through PRI(E1) > > line via DAHDI Channel > > Just like a normal variable: Set(__USERUSERINFO=whatever) in the sending > dialplan before the Dial command. > > Then on the receiving end, you can refer to ${USERUSERINFO} in the dialplan > for the answered call. > > However, to make this work, you need to make sure chan_dahdi.c contains the > following line when it is compiled: > > #define SUPPORT_USERUSER > > This is required on both ends of the call. It is a pity it has never become > the default. > > Regards > Tony > -- > Tony Mountifield > Work: [email protected] - http://www.softins.co.uk > Play: [email protected] - http://tony.mountifield.org > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
