Kevin P. Fleming <[email protected]> wrote: > Trevor Hammonds wrote: >> I have installed Free Fax For Asterisk 1.6.1_1.0.8 on Asterisk >> SVN-branch-1.6.1-r194876M and am getting a peculiar error message. >> >> Current scenario, while testing, is to receive an inbound fax call via >> a regular DID and then transfer the call to the internal fax >> extension. When I do so, I receive the following error message on the >> console, several times: >> >> WARNING[2895]: chan_sip.c:5369 sip_write: Asked to transmit frame type >> 64, while native formats is 0x4 (ulaw)(4) read/write = 0x40 >> (slin)(64)/0x4 (ulaw)(4) > > WARNING != ERROR :-)
I get that. Sorry for the misstatement. :-) > In spite of that, are there *no* other messages before that which would > indicate a problem setting up a translation path or similar problems? The only console messages are related to the FAX setup and the call transfer event. New development: I've assigned an external DID to the fax extension, and fax calls come in fine, with a strange burst of noise about one second into the preamble. However, I am still unable to transfer an inbound call from another DID to the fax extension. >> Also, the documentation is a little unclear on one issue. I would >> like to know if this version of FFA (1.6.1_1.0.8) will work with >> Asterisk 1.6.2. > > Asterisk 1.6.2 is still in beta, so its APIs are still subject to > change. FFA for Asterisk 1.6.1 *may* work fine with it, or may not. Once > Asterisk 1.6.2 reaches the release candidate state, if new FFA modules > are required then they will be produced and the FFA download selector > page will be updated to reflect that. Thanks for the clarification and your assistance. Sincerely, Trevor Hammonds _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
