Still no luck getting this to work. I have been looking at the CallManager Logs but so far that is worse then useless. Anyone out there have any luck connecting Asterisk 1.4 and Cisco CallManager 3.3(5)?
Jimmy Ezell http://qvlweb.blogspot.com/2009/04/asterisk-pbx-install-index.html ________________________________ From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Jimmy Ezell Sent: Wednesday, June 10, 2009 12:12 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Asterisk to CCM As you can see below I am striping off the 8 before it ever goes to CCM in the extensions.conf file. exten => _8XXX,1,Dial(${CISCOTRUNK}/${EXTEN:1...@172.16.200.10:1720) I have the H323 gateway in CCM configured to use the same Calling Search Space as my phone extensions. Jimmy Ezell ________________________________ From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Dan Austin Sent: Tuesday, June 09, 2009 4:41 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Asterisk to CCM Make sure you are stripping the 8 on inbound calls to that H323 gateway under CCM and that it has a valid search space to find your extensions... From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Jimmy Ezell Sent: Tuesday, June 09, 2009 3:13 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] Asterisk to CCM Hit another problem in my tutorial in converting over from Cisco CallManager to Asterisk. I have been following the instructions at : http://voip-info.capatres.com/wiki/view/Asterisk+Cisco+CallManager+Integ ration.html on intergrating Asterisk and Cisco CallManager. I can make calls from CCM to Asterisk phones - and yes that felt good to get that working. My problem is that it does not work from the other direction. I cannot make calls from CCM phones to Asterisk Phones. I want to be able to dial 8 and the extension of the ccm phone. I am using CCM 3.3.(5) so I do not have the option to use a SIP turnk because it is not supported. I am also using h323 instead of ooh323. Not sure if that might make a difference. In Asterisk console I get: -- Executing [8...@internal:1] Dial("SIP/207-08bd64c8", "H323/callman02/2...@172.16.200.10:1720") in new stack -- Requested transfer capability: 0x00 - SPEECH -- Called callman02/2...@172.16.200.10:1720 == Everyone is busy/congested at this time (1:0/0/1) This is the contents of my h323.conf file: ================= [general] port = 1720 bindaddr = 172.17.100.2 disallow=all allow=gsm ; Always allow GSM, it's cool :) allow=ulaw ; see doc/rtp-packetization for framing options allow=alaw dtmfmode=rfc2833 gatekeeper = DISABLE context=default [callman02] type=friend context=default ip=172.16.200.10 port=1720 disallow=all allow=gsm allow=ulaw allow=alaw dtmfmode=rfc2833 nat=no canreinvite=yes qualify=yes extensions.conf file ============== [globals] CISCOTRUNK=H323/callman02 [cisco] exten => _8XXX,1,Dial(${CISCOTRUNK}/${EXTEN:1...@172.16.200.10:1720) exten => _8XXX,n,Congestion() exten => _8XXX,n,Hangup() Jimmy Ezell Converting CCM to Asterisk http://qvlweb.blogspot.com/2009/04/asterisk-pbx-install-index.html
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users