Hello, I was testing my asterisk for a while with 1.6 without much problem.
Now i am trying to install a new system with asterisk 1.4 but now i am using a dual pri card instead of single pri.(TE220P) What i want is to use both PRI ports as group. Now i have zaptel.conf file created as follows -------------------------zaptel.conf-------------------------- # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) span=1,1,0,ccs,hdb3 # termtype: te bchan=1-15,17-31 dchan=16 # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" span=2,1,0,ccs,hdb3 # termtype: te bchan=32-46,48-62 dchan=47 # Global data loadzone = us defaultzone = us --------------------------------------------------------------- As i see from some web examples i made my zapata.conf as follows.. -------------------zapata.conf------------------------ [channels] language=en context=default switchtype=euroisdn ;If you connect to a hicom PBX set your ISDN Numbering Plan Identifier to unknown. pridialplan=unknown prilocaldialplan=unknown signalling=pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no group = 1 channel => 1-15 channel => 17-31 channel => 32-46 channel => 48-62 ------------------------------------------------------------- First of all, im not sure if that config is correct or not... Any corrections are welcome about creating group. Second.. What should i write to my freepbx zap configurator. "g1" as zap identifier??? _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
