Start by creating two ZAP Groups, i.e. ZAP/G0 and ZAP/G1 then you can route the calls according to ZAP groups inbound and outbound.
- /etc/zaptel.conf: Configuration of your hardware interfaces - /etc/asterisk/zapata.conf<http://www.voip-info.org/wiki/view/Asterisk+config+zapata.conf>: Asterisk configuration to use your hardware interfaces I have done the same setup on a Sangoma A101 connected to a channelbank. http://www.voip-info.org/wiki/view/Asterisk+config+zaptel.conf http://www.voip-info.org/wiki/view/Asterisk+config+zapata.conf On Mon, Jun 22, 2009 at 5:25 PM, Jeremy Winder <[email protected]>wrote: > I'm new to Asterisk and inherited this project so I apologize if this > question has been asked a hundred time before. I did start with Google > but I may not be asking the right questions, because I wasn't finding > any answers. > > I have Asterisk 1.4.24 and FreePBX 2.5 running and using a Digium > TDM800P to interface with our six analog phone lines from the telco. > Currently I have a single trunk setup ZAP/G0 that will allow all > incoming call go to your IVR and allow outgoing calls. > > My problem is I need two of those lines to be routed to one IVR for our > tech support people and the other four to be routed to our main business > IVR. For the life of me, I can't seem to find anything online about how > to do this. I thought about setting up six separate trunks; but I didn't > see anywhere you specify the channel for the trunk and right now my > single trunk is working with all of the analog lines. > > Any help will be greatly appreciated, > > Jeremy > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Kerem Erciyes Sistem Danismani http://proje.keremerciyes.com [email protected] +90 532 737 05 83
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
