Steve Casto escribió:
I am trying to retrieve the cause code of a outgoing call over a PRI
where the number called is out of service. When an out service number is
called I get a recording that the number dialed is not a working
number. I see cause code 1 in in the CLI as soon as the call is dialed
the Telco recording goes on for 30 sec. then hangs up. Any idea on how
retrieve info that the called number is is out of service. My
understanding is cause code 1 is an unallocated number.
thanks
Steve Casto
Asterisk 1.4.21.1
-- Executing [17609199...@admin3:1] Dial("SIP/Bob-00aaf150",
"Zap/G1/17609199147||g") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called G1/17609199147
-- Zap/23-1 is proceeding passing it to SIP/Bob-00aaf150
-- PROGRESS with cause code 1 received
-- Zap/23-1 is making progress passing it to SIP/Bob-00aaf150
-- Channel 0/23, span 1 got hangup, cause 102
-- Hungup 'Zap/23-1'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [17609199...@admin3:2] NoOp("SIP/Bob-00aaf150", "102")
in new stack
== Auto fallthrough, channel 'SIP/Bob-00aaf150' status is 'CHANUNAVAIL'
from extensions.conf
exten => _1NXXXXXXXXX,1,Dial(Zap/G1/${EXTEN},,g)
exten => _1NXXXXXXXXX,n,NoOp(${HANGUPCAUSE})
from zapata.conf
context=pri
group=1
switchtype=national
signalling = pri_cpe
priindication = outofband
channel =>1-23
I never saw a PRI behave that way with a "progress with cause X", but I
think that's to be able to reproduce the message. On all the PRI's I had
the change to manage, if a number was unallocated the telco side would
*request a hangup *with cause code X. That would leave you with a
inmediate response that can be easily retrieved on ${HANGUPCAUSE} as you
have in your dialplan. You can ask your telco to change the behavior to
hangup with the corresponding cause code as you don't need to hear the
message (if you still need your users to hear something, you can
playback an appropiate internal message or tones depending on the hangup
cause received).
On the other hand, have you tried changing the switchtype from national
to euroisdn? It may help if your telco uses that type of switches,
because the call setup info varies a little on each configuration.
Cheers,
--
Ing. Miguel Molina
Grupo de Tecnología
Millenium Phone Center
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
