Hello, I use asterisk as a PRI gateway between the PRI line from the telco (span 1) and the customers PBX (span 2) . I did a "pri debug" because I had some problems with incoming routings.
>From the telco I get: 1 < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 1 < ChanSel: Reserved 1 < Ext: 1 Coding: 0 Number Specified Channel Type: 3 1 < Ext: 1 Channel: 28 ] But on span2 I asterisk sends: 2 > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0 2 > Ext: 1 Coding: 0 Number Specified Channel Type: 3 2 > Ext: 1 Channel: 1 ] I compared all parameters I know like TON (type of number) etc... and they match. What I get on span 1 is the same that is sent on span 2 except this "Ext: 1 Channel: X". What does that parameter means and how can I modify it. Best regards, Loïc Didelot. -- Loïc DIDELOT MIXvoip S.a. Tel: +352 20 3333 20 Fax: +352 20 3333 90 [email protected] http://www.mixvoip.com _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
