On 13/7/09 2:23 PM, eric weaver wrote: > I am doing a little application to originate a call through Asterisk via > AMI (Perl Asterisk::Manager). > It logs in successfully, does an originate command with > Exten: 0020 (which is set up to answer and wait for 60 then hang up) > Channel: SIP/5101234...@test-host (which comes to my desktop machine > also running Asterisk). > > At the target machine I see only a CANCEL to which it immediately > responds with a No Transaction. Except for every nth try, when I see an > INVITE; but only that often. > > It looks like AstMan is asking for a Slin-format connection and the > channel is set up only for Slin or Ulaw but it says "joint capabilities > 0x0". Don't know if that's a red herring. > Any advice welcome.
The Asterisk Manager won't have any idea about codecs etc. I suggest the best way to tackle this is to make sure you can make the same call using the dialplan first, then move to the manager - settings like codecs will therefore show up in the initial testing. -- Cheers, Matt Riddell Director _______________________________________________ http://www.venturevoip.com/news.php (Daily Asterisk News) http://www.venturevoip.com/st.php (SmoothTorque Predictive Dialer) http://www.venturevoip.com/c3.php (ConduIT3 PABX Systems) _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
