-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Mark Michelson wrote: > > You need to set a call-limit for the SIP peer. Device state calculation for a > SIP peer is predicated on both the call-limit and busylevel. Let's say that > you > were to have a call-limit of 2, but no busylevel set. These are the device > states reported for the peer based on the number of calls currently handled:
Hi Mark. Thanks for your explanation of these parameters. I should have posted my configurations. I double-checked the contents of sip.conf and I have this. The 'subscribecontext' was added for testing, per the other reply I got for my question. ; ; Settings common to all devices on our system ; [basic-options](!) type=friend host=dynamic canreinvite=no disallow=all allow=ulaw dtmfmode=rfc2833 qualify=yes ; ; Standard desksets here ; [lan-deskset](!,basic-options) context=sip-deskset notifyringing = yes notifyhold = yes limitonpeers = yes call-limit=99 [6668](lan-deskset) secret=mysecret callerid="Matts SIP" <6668> username=Barry's IP450 call-limit=32 busylevel=1 subscribecontext=hint-context My hint-context is: [hint-context] exten => 6668,hint,SIP/6668; I'm still not getting anything other than NOT_INUSE from DEVICE_STATE. Here is the CLI output: [Jul 15 18:40:15] -- Executing [6...@sip-deskset:1] NoOp("SIP/6666-0955ecc8", "SIP/6668 has state NOT_INUSE") in new stack [Jul 15 18:40:15] -- Executing [6...@sip-deskset:2] NoOp("SIP/6666-0955ecc8", "SIP/6666 has state NOT_INUSE") in new stack [Jul 15 18:40:15] -- Executing [6...@sip-deskset:3] ExecIf("SIP/6666-0955ecc8", "0?Busy(10)") in new stack [Jul 15 18:40:15] -- Executing [6...@sip-deskset:4] Dial("SIP/6666-0955ecc8", "SIP/6668") in new stack And here is sip show inuse: corp-asterisk*CLI> sip show inuse * User name In use Limit 6668 1 32 6667 0 99 6666 1 99 * Peer name In use Limit 6668 1/1/0 32 6667 0/0/0 99 6666 0/0/0 99 For completeness, here is the dialplan that's producing this: exten => 6668,1,NoOp(SIP/${EXTEN} has state ${DEVICE_STATE(SIP/${EXTEN})}); exten => 6668,n,NoOp(SIP/6666 has state ${DEVICE_STATE(SIP/6666)}); exten => 6668,n,ExecIf($[${DEVICE_STATE(SIP/${EXTEN})}="BUSY"]?Busy(10)); exten => 6668,n,Dial(SIP/${EXTEN}); -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) iD8DBQFKXlwaCFu3bIiwtTARAkRpAJ4+2WF9qrIwrC3Kdpwd0YAOm/5S1wCfUR1T CtI9kZNQYpW2Sv6uFNud7Jo= =9Zp/ -----END PGP SIGNATURE----- _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users