Apologies. Didn't mean to omit key information, I doubt it's a problem with * because everything else is working great so I was asking for help on troubleshooting the PRI.
Anyway, here's the 411: Asterisk 1.4.20, CentOS 5.2 Service Providers: Quest & Deltacom, Local Loops provided by Embarq What snippets of the config would be helpful? I've included zapata.conf and zaptel.conf below. >>> zapata.conf: ;autogenerated by /usr/local/sbin/config-zaptel do not hand edit ;Zaptel Channels Configurations (zapata.conf) ; ;For detailed zapata options, view /etc/asterisk/zapata.conf.orig [trunkgroups] [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;Sangoma A102 port 1 [slot:8 bus:1 span:5] <wanpipe5> switchtype=dms100 context=from-pstn group=0 signalling=pri_cpe channel =>97-119 ;Sangoma A102 port 2 [slot:8 bus:1 span:6] <wanpipe6> switchtype=dms100 context=from-pstn group=1 signalling=pri_cpe channel =>121-143 >>> zaptel.conf: # Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit # Zaptel Channels Configurations (zaptel.conf) # loadzone=us defaultzone=us #Sangoma A102 port 1 [slot:8 bus:1 span:5] <wanpipe5> span=5,0,0,esf,b8zs bchan=97-119 hardhdlc=120 #Sangoma A102 port 2 [slot:8 bus:1 span:6] <wanpipe6> span=6,0,0,esf,b8zs bchan=121-143 hardhdlc=144 Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200 [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Doug Lytle Sent: Thursday, July 23, 2009 2:19 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] PRI call progress issue David Ruggles wrote: > is busy I'll get dead air. Can anyone suggest ways to trouble shoot this? > Don't seem to having any other problems with the PRIs. > It'd be nice to start with what version of Asterisk, what distro, who is your service provider and snippets of your config. On our PRIs we show busy when a line is busy. My systems are out of Michigan and Indiana. Doug -- Ben Franklin quote: "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety." _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
