|
Hello to the list again.
I have my ATA behind NAT connecting to * then calls
are fwd to Cisco 2600. Calls are completing, I just cannot figure out why
I don't hear any ALERTING signals from the 2600 (ringback, fast busy, SIT,
etc). Audio works fine though. I'm using G711ulaw. And I don't
want ATA or * to provide the false ringback so I took out ('r') in my Dial
command. Existing command is as follows:
exten=>_.,1,Dial(SIP/${EXTEN},20,tH)
I hope somebody out there could help me on
this. Thanks.
|
