Hi everybody,
In an Asterisk 1.6.0.5, dahdi-linux-2.1.0.4, dahdi-tools-2.1.0.2, with a Digium B410P and an OpenVox A400E, I can't make "dahdi_scan" to recognize the OpenVox. This card was working correctly but suddenly stopped working and I cannot make it work again. Both “lspci” and “dahdi_hardware” detect it but “dahdi_scan” not and I cannot use it. >lsppci: *0a:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface* 11:00.0 ISDN controller: Digium, Inc. Wildcard B410 quad-BRI card (rev 01) > dahdi_hardware: pci:0000:0a:00.0 wctdm- e159:0001 Wildcard TDM400P REV E/F pci:0000:11:00.0 wcb4xxp+ d161:b410 Digium Wildcard B410P As you can see, it seems that wctdm driver is not loaded (minus sign beside wctdm) but if I restart dahdi, it loads it correctly: Loading DAHDI hardware modules: wctdm: [ OK ] wcb4xxp: [ OK ] Running dahdi_cfg: [ OK ] The dahdi_scan result is the following: [1] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 1 name=B4/0/1 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=1 totchans=3 irq=66 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS [2] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 2 name=B4/0/2 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=4 totchans=3 irq=66 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS [3] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 3 name=B4/0/3 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=7 totchans=3 irq=66 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS [4] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 4 name=B4/0/4 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=10 totchans=3 irq=66 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS The lsdahdi result is the following: ### Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS 1 BRI Clear (In use) (EC: MG2) 2 BRI Clear (In use) (EC: MG2) 3 BRI Hardware-assisted HDLC (In use) ### Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS 4 BRI Clear (In use) (EC: MG2) 5 BRI Clear (In use) (EC: MG2) 6 BRI Hardware-assisted HDLC (In use) ### Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" AMI/CCS 7 BRI Clear (In use) (EC: MG2) 8 BRI Clear (In use) (EC: MG2) 9 BRI Hardware-assisted HDLC (In use) ### Span 4: B4/0/4 "B4XXP (PCI) Card 0 Span 4" AMI/CCS 10 BRI Clear (In use) (EC: MG2) 11 BRI Clear (In use) (EC: MG2) 12 BRI Hardware-assisted HDLC (In use) I’ve tried to re-install dahdi-linux and dahdi-tools but stay the same. Does anybody know what could be wrong? Many thanks
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
