This may be a stupid question, but IS THERE a message waiting against your PSTN lines?
-Dave -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mike Sent: Tuesday, August 04, 2009 1:33 PM To: [email protected] Subject: [asterisk-users] Message Waiting Indicator on DAHDI line Folks, I have recently installed Asterisk 1.6.1.1. I have two PSTN lines connected to a TDM400 and two VoIP lines using SIP. I have a CISCO 7940 using SIP as my desk phone. Calling any of the four lines should ring the desk phone. This works fine, except that when ringing the PSTN lines, it activates the MWI on the 7940. I can see this happening on the console: [Aug 4 16:48:47] NOTICE[2964]: chan_dahdi.c:7669 ss_thread: MWI: Channel 3 message waiting! Looking at the offending piece of code, it seems to suggest from the comment that it is getting the MWI from the CLID. /* If the CID had Message waiting payload, assume that this for MWI only and hangup the call */ if (flags & CID_MSGWAITING) { ast_log(LOG_NOTICE, "MWI: Channel %d message waiting!\n", p->channel); notify_message(p->mailbox, 1); /* If generated using Ring Pulse Alert, then ring has been answered as a call and needs to be hungup */ if (p->mwimonitor_rpas) { ast_hangup(chan); return NULL; } } I have set "usecallerid=no" on both interfaces and globally but I still cannot get it to stop. I have failed to turn anything up on Google regarding this. Does anyone have any suggestions please? Mike. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
