Use a standard network cable - but you have to activate the 'terminate' jumper on the NT end.
- Also, the new BRI stuff in dahdi is much easier to work with than misdn. PaulH voip crazy wrote: > Hello all, > > I'm trying to conect two asterisk servers using two B410p Digium > cards. One card on each server. I just setting up the first BRI port > on server A as nt_ptp and the first BRI port on server B as te_ptp. > I use an ethernet wire to connect the first port of server A (nt_ptp) > with the first port on server B (te_ptp) but the port light cotinues > blinking on red on both sides once the cable was pluged. Then I use an > isdn crossover wire with this king of schema and the lights get > blinking red again. > > Tx+ 3 ------+ +----- 3 > . X > Rx+ 4 ------+ +----- 4 > . > Tx- 5 ------+ +------5 > . X > Rx- 6 ------+ +------6 > > In both servers when I do in asterisk CLI "misdn shos stacks", the > port one on each machine shows > > Server A: > > BEGIN STACK_LIST: > * Port 1 Type TE Prot. PTP L2Link DOWN L1Link:DOWN Blocked:0 Debug:0 > > > Server B: > > BEGIN STACK_LIST: > * Port 1 Type NT Prot. PTP L2Link DOWN L1Link:DOWN Blocked:0 Debug:0 > > Which kind of cable should I use? > Why both in ports L1Link is failed? > How could I solve that? > > Any clue will be welcomed. > > Thanks in advance. > > VoipCrazy. > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2009 - October 13 - 15 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
