On Wed, Sep 02, 2009 at 09:44:05AM -0500, Doug Bailey wrote: > > ----- "Barry Miller" <asterisk-us...@notanet.net> wrote: > > > Hi, > > > > Using 1.4.26.1 & DAHDI 2.2.0.2, FSK VMWI devices off a TDM840 work > > fine. > > > > With 1.6.1.[45] & same DAHDI, instead of the FSK spill I get a line > > polarity reversal. Stutter dialtone is generated as expected. > > > > Has anyone else seen this? Is there anything special I need to do > > for > > 1.6.1 to make FSK MWI work? > > > > The ability to do line reversal MWI was added into the 1.6.2 branch. > Looking through the 1.6.1 code base, I don't see anything other than fsk > MWI (with and without Ring Pulse Alert Signalling.) > > In any case, this is set by defining "mwisendtype" in chan_dahdi. > The default for this is fsk spills. > It can be set to "nofsk" if you want to disable the fsk spills. > > The line reversal is set by specifying > mwisendtype=lrev > > Regards, > Doug Bailey > Thanks, but that's not the problem. I _want_ FSK. A few ast_debug's in chan_dahdi tell me that after calling vmwi_generate(), it's taking the MWI_SEND_SPILL path through mwi_send_thread(), and happily sending about 9K bytes of spill, 160 bytes at a time. But my phones (and a butt-set) tell me that nothing is being received.
I don't understand the DAHDI ioctls very well. Is it possible that the TDM840 is not in the correct state when the spill is transmitted? Thanks again, --Barry _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users