Have you been able to find a satisfiable config? My biggest headache is
the useless voicemails being left if the caller hangs up during the
greeting, otherwise it appears to work as intended.
Agree on the Zoloft, this is driving me nuts!!!!!
On 9/25/09 11:45 AM, Danny Nicholas wrote:
If you're really going to pursue this, I'd buy stock in Zoloft -- I've
got a TDM400 and TDP410 and they both drive me nuts on POTS issues...
------------------------------------------------------------------------
*From:* asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] *On Behalf Of
*Stephen Brown
*Sent:* Friday, September 25, 2009 10:41 AM
*To:* asterisk-users@lists.digium.com
*Subject:* Re: [asterisk-users] DAHDI disconnect supervision timing
I have, but I wanted to see if I could fix this problem before I
started experimenting with that.
On 9/25/09 11:24 AM, Danny Nicholas wrote:
Have you looked into minimum message length and/or silence parameters?
------------------------------------------------------------------------
*From:* asterisk-users-boun...@lists.digium.com
<mailto:asterisk-users-boun...@lists.digium.com>
[mailto:asterisk-users-boun...@lists.digium.com] *On Behalf Of
*Stephen Brown Jr
*Sent:* Friday, September 25, 2009 10:20 AM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion
*Subject:* [asterisk-users] DAHDI disconnect supervision timing
Ok so this is officially driving me crazy. I have an Asterisk 1.6.1.6
install with DAHDI/DAHDI tools (latest) and an OpenVOX TDM400 card
with 1 FXO port and 1 FXS port. I have a POTS line from my phone
company attached to the POTS line.
I have asked for "disconnect supervision" to be provisioned on my line
and they claim to have added it. However, my scenario is as follows:
I receive a call, if the caller hangs up before hitting voice mail,
the DAHDI channel is released as to be expected (evidenced from
console messaging)
If the call gets to voicemail and the caller hangs up during the
greeting, no hangup condition is ever detected and I am greeted with a
useless voicemail moments later.
I am using kewlstart signaling etc. I came across this page from Digium:
http://kb.digium.com/entry/6/
This suggests adjusting a variable in zaptel.h, as I don't use zaptel,
can this same logic be applied to DAHDI somewhere? My theory is that
the "disconnect supervision" signal coming from the phone company may
be less than 1000ms.
Desperately trying to fix this.....
Thanks,
Stephen
_______________________________________________
-- Bandwidth and Colocation Provided byhttp://www.api-digital.com --
AstriCon 2009 - October 13 - 15Phoenix,Arizona
Register Now:http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2009 - October 13 - 15 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2009 - October 13 - 15 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
