Thanks, I made the zone, and now call disconnect works ok! i have one last problem, I have defined the card g0 to have 24 channels, but every time I try to call, if all ports are off the call always go to the first port, how can I balance the calls over all ports???
Any suggestions appreciated. Thanks all for the help. -----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Ioan Indreias Sent: Monday, October 05, 2009 5:43 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] tdm outgoing > > I cant find Zapata.cfg You have a DAHDI installation thus you have to find chan_dahdi.conf. it should be located under /etc/asterisk Regarding the configuration for tones you have to check indications.conf file Best regards, Nini _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users