----- "Eckhard Jokisch" <e.joki...@orange-moon.de> wrote: > Hi, > I set up my asterisk so it does dial out on DAHDI/1 which is on an FXS > modul. > But the phone that is attached to the line does nothing at all. > asterisk-CLI shows a lot of > -- DAHDI/1-1 is ringing > -- DAHDI/1-1 is ringing > -- DAHDI/1-1 is ringing > > Even when I lift up the handset during (and no asterisk-activity) I do > not get > the usual line tone. > > CLI>dahdi show channel 1 gives: > > > File Descriptor: 17 > Span: 1 > Extension: > Dialing: no > Context: DLPN_DialPlan1 > Caller ID: 4000 > Calling TON: 0 > Caller ID name: FXS 1 > Mailbox: 4000 > Destroy: 0 > InAlarm: 0 > Signalling Type: FXO Kewlstart > Radio: 0 > Owner: <None> > Real: <None> > Callwait: <None> > Threeway: <None> > Confno: -1 > Propagated Conference: -1 > Real in conference: 0 > DSP: no > Busy Detection: no > TDD: no > Relax DTMF: no > Dialing/CallwaitCAS: 0/0 > Default law: ulaw > Fax Handled: no > Pulse phone: no > DND: no > Echo Cancellation: > 128 taps > currently OFF > Actual Confinfo: Num/0, Mode/0x0000 > Actual Confmute: No > Hookstate (FXS only): Onhook > > > > What am I missing? >
Is your cable from the port to the phone good? Tim Nelson Systems/Network Support Rockbochs Inc. (218)727-4332 x105 _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
