On Mon, 2009-10-26 at 14:58 -0500, Danny Nicholas wrote:
> *8 is the default value in features.conf to pick up a ringing line if you
> are in that ring group.
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Elliot Murdock
> Sent: Monday, October 26, 2009 2:52 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [asterisk-users] Answer call from another device
>
> Hello!
>
> I remember a while back I saw a way to answer a call from a device
> that is not from the one ringing, but I don't remember what how to do
> it. Any help would be great!
<snip>
One can take it even a little further than that depending on the phone.
We set up hints in extensions.conf so the programmable button lights on
our Snom phones indicate if a remote phone is ringing or off hook.
While it is ringing, a user can press the button which will issues the
*8 + extension and pick up the call. Here is an abbreviated example:
; Joe
exten => 613,hint,SIP/joe
; Mary
exten => 614,hint,SIP/mary
; Mike
exten => 616,hint,SIP/mike
; Enable call pickup for hinted stations from any possible source contexts
exten =>
_*8XXX,1,Pickup(${EXTEN:2...@a10pub&${EXTEN:2...@a10a&${EXTEN:2...@a10f)
We're pretty new to Asterisk so there may be a much better way but this
worked for us. Good luck - John
--
John A. Sullivan III
Open Source Development Corporation
+1 207-985-7880
[email protected]
http://www.spiritualoutreach.com
Making Christianity intelligible to secular society
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
