Okay here is an update... With my extensions.conf and parking.conf, etc.. Files, I was able to place a call with the usb phone (analog on zap/3) and park it by pressing flash, then typing in 701... From the SIP phones I am still unable to transfer to 701. What does that mean? Is that something to do with the T instead of t?
Thanks for you patience and help through this... Sean -----Original Message----- From: Lance Arbuckle [mailto:[EMAIL PROTECTED] Sent: Friday, January 16, 2004 1:28 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Parking extension not working Sean Garland wrote: > > Okay, lets start over... I have basically a simple parking.conf, I > use > 701 as the parkext because of Andy Powells suggestion, I use a range > of 702-710. I have in my [sip] context and include => default and in > the [default] context, I have the stock include => localcalls which > has on include => parkedcalls. When asterisk is loaded and I type > show dialplan at the console, I get a list of what appears to be all > the extensions available to me and their respective contexts. Nowhere > in that list is an extension 701. Now when a call comes in, my > Polycom phone rings and I answer it. If I want to park the call I > press the conference button, and type 701, which then gives me a busy > signal for a few seconds, and the call is terminated. I ran a sip > debug and did the same procedure, and I can see that the polycom phone > requests extension [EMAIL PROTECTED] but then there is a 404 not found > error. Am I doing something wrong in the transfer procedure? When I > dial # on the polycom phone I get an instant busy, which I assume > means that my phone doesn't like that digit. > > So maybe my question should be, is anyone using polycom sip phones and > able to use the parked call feature? > > Sean > > -----Original Message----- > From: Lance Arbuckle [mailto:[EMAIL PROTECTED] > Sent: Wednesday, January 14, 2004 6:10 PM > To: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] Parking extension not working > > Sean Garland wrote: > > > > Yes, I have the include => parkedcalls in the default context which > > is > > > where my calls start from, in fact if I try to transfer to one of > > the parked locations as a test of transferring to the 7xx area, I > > get the "...no parked call.." message so it seems like the context is working. > > All of the parking location extensions show up in the dialplan. > > What should I see on the console when transferring to 700 (or 701 as > > it may > > be) from SIP? Will it work from sip? Is there a way I can test > > from the console? > > > > Thanks > > Sean > > I don't think you can transfer to a park extension directly. In other > words, you transfer to the parking lot ( default exten 700 ) and > Asterisk parks the call in whichever parking space is available. Then > Asterisk reads back the number of the parking space. On my system, > with 700 as the park extension and 701-720 as parking spaces, I get > the message "Sorry, there is no call parked on that extension" if I > try to transfer to 701 which is what I would expect since it's only > exten 700 which has the special park functionality. > > -Lance ok, let's try again.... In extensions.conf, do you have either a "t" or "T" as an option on your dial string like this: exten => s,203,Dial(${ARG2},20,rtT) ; Ring the interface, 20 seconds maximum If not, transfer isn't going to work and therefor park wont work either. -Lance Arbuckle _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
