Hello,
1. How can specify in /etc/dahdi/genconf_parameters file that a port from a
B410P board is to be "disabled".
Playing with comments (see bellow) doesn't help : file
/etc/asterisk/dahdi-channels.conf is filled with 4 ports data.
pri_termtype
SPAN/1 TE
SPAN/2 TE
SPAN/3 TE
# SPAN/4 TE
2. How can specify groups in /etc/dahdi/genconf_parameters ?
I would like to group SPAN/1 and SPAN/2 into group 1 and SPAN/3 into group
2.
I was unsuccessful with :
group_lines 1
pri_termtype
SPAN/1 TE
SPAN/2 TE
group_lines 2
pri_termtype
SPAN/3 TE
3. After a dahdi_genconf commande, generated
/etc/asterisk/dahdi-channels.conf is like this :
; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
group=5,11
context=remote
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
context = default
group = 63
I can see 2 "group=" and "context=" lines. What is the difference between
them ?
Shall I care to have them both ?
Regards
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
