It looks like "make config" takes care of installing an init script,
so I can just run "/etc/init.d/dahdi start to load the required
modules.
I get the following error, however:
-----------
# /etc/init.d/dahdi start
Loading DAHDI hardware modules:
wcfxo: [ OK ]
Running dahdi_cfg: DAHDI_CHANCONFIG failed on channel 1: No such
device or address (6)
[FAILED]
-----------
FWIW, the PCI card seems to be correctly detected:
-----------
# lspci -v
03:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
Subsystem: Unknown device b100:0003
Flags: bus master, medium devsel, latency 64, IRQ 12
I/O ports at a000 [size=256]
Memory at e2000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
-----------
Here's /etc/dahdi/system.conf:
-----------
loadzone=fr
defaultzone=fr
fxsks=1
-----------
Any idea what is wrong?
Thank you.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
