On Tue, Dec 22, 2009 at 9:08 AM, Khaled W Chehab <kche...@xplorium.com>wrote:
> I have a 'CONGESTION' Status with R2 protocol. > > While testing this scenario sip GW--àAsterisk –Digium E1 R2 ProtocolàCisco > E1 R2 protocolàsip Gw > > Find below my error and configuration ,where are the errors in my > configuration ? > Typically you will be better off in the asterisk-r2 mailing list. Your message is more easily spotted by R2 people. First thing is to check you have green status in your E1, do you? and make sure you have the right clock settings, I never configured a cisco but it seems you configured the cisco to be a slave and I don't see any port in DAHDI system.conf with master clock settings. (span=1,0,0...etc) After that, enable R2 call logging using mfcr2_call_files=yes and pastebin the generated call file (if any), if no file is generated it means the problem is not at R2 but in your local trunk settings (may be dialing in the wrong group or something). -- Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. m...@sangoma.com
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users