Am 02.03.2010 13:29, schrieb Magnus Benngård: > Hi! > > Did a setup of 2 peers as Klaus suggested, it worked thx! > > Has anyone thought about the possibility to add multiple ip/hosts to > "host="? > > I my case: "host=130.244.190.42,130.244.190.46" or > "host=sip-corporate1.tele2.se,sip-corporate2.tele2.se" > > Step 1 could be to send to the first ip/host and accept from both. > > Step 2 could be "round-robin" send if both are up and alive...
IMO this would be a nice feature. > Btw, did try trunk version, no support for multiple SRV records there. IIRC correctly there is a patch on the bugtracker for SRV handling, but I do not know if that patch would fix this too. regards klaus > > > > Am 02.03.2010 08:50, schrieb Magnus Benngård: > > Hi, > > > > Did order and setup a SIP trunk to a Swedish ITSP named Tele2. No > > problem to get outgoing calls to work but i have some problems with > > incoming. > > > > Did set "srvlookup=yes" in sip.conf. "Sending" all outgoing calls to > > "sip-corporate.tele2.se" which is either sip-corporate1.tele2.se > > (130.244.190.42) or sip-corporate1.tele2.se (130.244.190.46). > > > > If i do a "sip show peer Tele2", I see that Asterisk has chosen > one of > > them: ToHost : sip-corporate.tele2.se > > Addr->IP : 130.244.190.46 Port 5060 > > > > Now my problems starts, when Tele2 sends a call to my Asterisk, > the call > > can come frome any of those two ip-adresses. If it comes from > > 130.244.190.46 everything if fine, but if it comes from > 130.244.190.42: > > "[Mar 2 08:46:03] NOTICE[1372]: chan_sip.c:19167 > handle_request_invite: > > Failed to authenticate!" > > > > I thought "srvlookup=yes" should take care about that, but then i > read a > > little bit more and found: "Note: Asterisk only uses the first > host in > > SRV records". :( > > Hi Magnus! > > Asterisk does not support multiple SRV records (expcet there were some > recent changes which I missed) - it takes one of the most priors and > use > it all the time. > > Thus, in your scenario you have to specify the possible inbound sources > manually as peers: > > [tele2-1] > type=peer > host=130.244.190.42 > context=fromTele2 > ... > [tele2-2] > type=peer > host=130.244.190.46 > context=fromTele2 > ... > > > regards > klaus > > > > > > Can anyone plz give me some hint howto solve my problem? > > > > Regards, > > > > Magnus > > > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users