Thanks Steve for the info. that was certainly very helpful! I shall see if PCCW will b*tch about it. Hopefully not! By the way, have you tried DID on IDA-P on any carriers in HK? NTT, HGC, NWT?
David ----- Original Message ----- From: "Steve Underwood" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, January 21, 2004 3:53 AM Subject: Re: [Asterisk-Users] T400P / T100P with Hong Kong IDA-P Lines > Hi David, > > David Liu wrote: > > > Hi there, > > > > Anyone had any success deploying Asterisk with a T100P or T400P card > > in Hong Kong? To my understanding, Hong Kong carriers only provide > > IDA-P or IDA-M lines. I am looking to use IDA-P. Is this possible > > with the card? > > > > I know Cisco 2651XMV with a VIC card can do it. But that's just way > > too expensive! > > > IDA-M is robbed bit signalling. It comes in several forms in HK which > are functionally equivalent to the US, but use different names. * > should work OK with these. IDA-P is the 5ESS ISDN protocol. Again * > should work OK. I haven' t tried * with real PCCW T1 lines, but its > unlikely there will be any problems. The Digium cards are not approved > in HK, and PCCW make ask what cards you intend to attach (sometimes they > do, and sometimes they don't). > > Regards, > Steve > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
