2010/5/8 Olivier <[email protected]> > Hi, > > I'm trying to dial from one Asterisk box to a Patton 4638 BRI gateway. > I'm only getting this : > [May 8 15:08:24] WARNING[16797]: app_dial.c:1547 dial_exec_full: Unable to > create channel of type 'DAHDI' (cause 0 - Unknown) > > My setup is : > Asterisk 1.6.1.18 > libpri 1.4.10.2 > 1 Junghanns QuadBRI PCI-E express with : > - driver > http://webservices.jnetdns.de/~junghanns.net/downloads/jnet-dahdi-drivers-1.0.1.tar.gz<http://webservices.jnetdns.de/%7Ejunghanns.net/downloads/jnet-dahdi-drivers-1.0.1.tar.gz> > - every jumper set to TE mode > > > When typing "pri show spans", Asterisk replies nothing : > brs-dev*CLI> pri show spans > brs-dev*CLI> pri show version > libpri version: 1.4.10.2 > brs-dev*CLI> dahdi show version > DAHDI Version: 2.3.0 Echo Canceller: KB1 > > Each LED is green but dahdi_scan says : > # dahdi_scan > [1] > active=yes > alarms=OK > description=quadBRI PCI ISDN Card 1 Span 1 [TE] (ca > name=ztqoz/1/1 > manufacturer= > devicetype= > location= > basechan=1 > totchans=3 > irq=0 > type=digital- > syncsrc=0 > lbo=399-533 feet (DSX-1) > coding_opts=AMI > framing_opts=CCS > coding=AMI > framing=CCS > > > 1. Is this syncsrc=0 normal (we're in TE mode) ? > 2. Am I correct to hope "pri show spans" to display something ? > 3. Suggestions ? > > Regards > > I should have said I've tried unsuccessfully with both dahdi 2.2.1.1 and 2.3. I'm really wondering if PCI-E QuadBRI are supported.
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
