The following link may be a suitable workaround How do I change the type of line from E1 to T1/J1 without using jumpers? http://kb.digium.com/entry/121/
Alec Davis -----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Conor McTernan Sent: Thursday, 20 May 2010 7:09 p.m. To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] DAHDI and ESXi Does anybody have any experience of running Asterisk with DAHDI on ESXi? I am running Asterisk 1.4 with DAHDI 2.3 on ESXi 4.0 alongside a TE220 card. My asterisk install can see the card, but no matter what I do with the jumpers it remains in E1 mode. I have tested the card in another machine, in a non-virtualized setup and it works correctly (i.e. dahdi_scan reports the card as being in T1 mode). The issue appears to be with ESX, but I cannot understand why it would be ignoring (or even changing) the jumper settings. Has anyone else used any Digium cards in a virtualized environment. I am running all this on a Xeon E5506 so the PCI passthrough will work. Any ideas or comments are much appreciated. Thank you, Conor -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users